Abstract
Zn-Fe based high-order phase diagrams have found a wide range of applications in continuous galvanizing. With the development of computer software DEAL (DetermineEffectiveALuminum), the Zn-rich corner of the Zn-Fe-Al phase diagram is being used daily for scientific interpretation of bath assays. Computer software PAL (PredictAluminumLevel), also developed by Teck Cominco Metals Ltd., assesses transient equilibria between the steel substrate and the liquid galvanizing alloy for the estimation of Fe dissolution and Al consumption in galvanizing. Aluminum deportment in galvanizing baths has been scientifically described based on the fact that bath assays corresponding to different locations and depths of a galvanizing bath formed one tie-line in the liquid-Fe2Al5 two-phase field of the Zn-Fe-Al phase diagram. Zn-Fe based high-order phase diagrams also afford a better understanding of the mechanisms for a number of industrial phenomena. These practical applications of the Zn-Fe based phase diagrams are detailed in the article.
Similar content being viewed by others
References
N.-Y. Tang, X.P. Su, and X.B. Yu, The Zn-Rich Corner of the Zn-Fe-Co System at 450 °C,Z. Metallkd., 2003,94(2), p 116–121
N.-Y. Tang, X.P. Su, and X.B. Yu, A Study of the Zn-Rich Corner of the Zn-Fe-Sn System,J. Phase Equilibria, 2003,24(6), p 528–532
X.P. Su, F.C. Yin, Z. Li, N.-Y. Tang, and M.X. Zhao, Thermodynamic Calculation of the Fe-Zn-Si System,J. Alloy. Compd., 2005,396, p 156–163
N.-Y. Tang and X.B. Yu, Study of the Zinc-Rich Corner of the Zn-Fe-Cr System at Galvanizing Temperatures,J. Phase Equilibria Diffus., 2005,26(1), p 50–55
X.P. Su, N.-Y. Tang, and J.M. Toguri, 450 °C Isothermal Section of the Fe-Zn-Si Ternary Phase Diagram,Can. Metall. Q., 2001,40(3), p 377–384
N.-Y. Tang, 450 °C Isotherm of Zn-Fe-Al Phase Diagram Update,J. Phase Equilibria, 1996,17(5), p 396–398
X.P. Su and N.-Y. Tang, The Zinc-Rich Corner of the Zn-Fe-Ni-Si Quaternary System at 450 °C,J. Phase Equilibria, 2002,23(5), p 424–431
N.-Y. Tang, Y.H. Liu, and K. Zhang, Development of High Order Phase Diagrams for Practical Applications in Galvanizing, in Proceedings,44th Mechanical Working and Steel Processing (MWSP) Conference (Orlando, FL), Sept 8–11, 2002, p 815–821
G. Reumont and P. Perrot, Fundamental Study of Lead Additions in Industrial Zinc, in Proceedings,18th International Galvanizing Conference, Intergalva 97 (Birmingham, UK), June 8–11, 1997, European General Galvanizers Association, p 4/1–7
G. Reumont, T. Gloriant, and P. Perrot, The Zinc Rich Corner of the Fe-Zn-Ni-Ti Quaternary System at 450 °C,J. Mater. Sci. Lett., 1997,16, p 62–65
J. Faderl, J. Strutzenberger, and W. Fischer, Galvannealed Steel Sheet: 10 Years of Experience on Product and Process Improvement, Proceedings,Galvatech’01 (Brussels, Belgium), June 2001, Verlag Stahleisen GmbH, Düsseldorf, 2001, p 385–392
J.-S. Kim and J.-H. Chung, Galvannealing Behaviour of High Strength Galvanized Sheet Steels, Proceedings,Galvanised Steel Sheet Forum-Automotive, The Institute of Materials, London, UK, May 2000, p 103–108
M. Gagne, H. Guttman, J. L’Ecuyer, G.G. Brummitt, G.L. Adams, and D. Kleimeyer, The Analysis and Control of Aluminum in Galvanizing Baths, Proceedings,82nd Galvanizers Association Meeting (Niagara Falls, NY), Oct 22–25, 1990, p 126–145
N.-Y. Tang, G.R. Adams, and P.S. Kolisnyk, Determination of Effective Aluminum in CGL Baths, Proceedings,Galvatech’95 (Chicago, IL) Sept 17–21, 1995, ISS, p 777–782
P. Biele, Determination of the Active Al and Fe Contents in the Zinc Bath and Their Influence on Alloy-Layer Formation in the Hot-Dip Galvanizing Process, Proceedings,Galvatech’95 (Chicago, IL) Sept 17–21, 1995, ISS, p 769–776
M. Dauzat, F. Stouvenot, and T. Moreau, Zinc Rich Corner of the Fe-Zn-Al Revised Phase Diagram, Proceedings,Galvatech’92 (Amsterdam, The Netherlands), Sept 1992, Verlag Stahleisen, Düsseldorf, 1992, p 449–454
N.-Y. Tang, 450 °C Isotherm of the Zn-Fe-Al Phase Diagram,Mater. Sci. Technol., 1995,11, p 870–873
N.-Y. Tang, Determination of Liquid Phase Boundaries in Zn-Fe-Mx Systems,J. Phase Equilibria, 2000,21(1), p 70–77
M.-L. Giorgi, J.-B. Guillot, H. Biausser, and R. Nicole, Assessment of the Zinc-Aluminum-Iron Phase Diagram in the Zinc-Rich Corner, Proceedings,Galvatech’01 (Brussels, Belgium), June 26–28, 2001, Stahleisen GmbH, Düsseldorf, 2001, p 179–186
M. Urednicek and J.S. Kirkaldy, An Investigation of the Phase Constitution of Iron-Zinc-Aluminum at 450 °C,Z. Metallkd., 1973,64(6), p 419–427
X.P. Su, N.-Y. Tang, and J.M. Toguri, Thermodynamic Assessment of Zn-Fe System,J. Alloy. Compd., 2001,325(1–2), p 129–136
G.N. Anderson, N.-Y. Tang, and R.S. Patil, Aluminum Distribution in a CGL Bath, Proceedings,Galvanizers Association 88th Meeting (Chicago, IL), Oct 20–23, 1996, p 44–62
N.-Y. Tang, Characteristics of Continuous Galvanizing Baths,Metall. Mater. Trans. B, 1999,30B, p 144–148
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is based on a presentation made at the Galvanizers Association Ninety-Seventh Meeting held in Lexington, KY, from Oct 17 to 19, 2005.
Rights and permissions
About this article
Cite this article
Tang, NY. Practical applications of phase diagrams in continuous galvanizing. JPED 27, 462–468 (2006). https://doi.org/10.1007/BF02736444
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02736444