Pressurized 3-piece steel container explosions and failure mechanisms
- 84 Downloads
The design of 3-piece steel pressurized containers includes double seams that connect the bottom and top of the container to the container body. These seams have some inherent design features, such as crevices, that can lead to corrosion and other forms of failure. Since the 3-piece containers are pressurized with liquefied propellants, such as propane, failure can lead to catastrophic separation of the top or bottom from the body. This creates a “rocket” effect with the potential to cause serious personal injury and/or property damage. This paper presents the analysis of several such failures and demonstrates that corrosion, weld cracking, and stress concentrations act to cause sudden, unexpected, explosive failures. Several changes in construction that could minimize the tendency for explosion are also discussed.
KeywordsAchilles’heel aerosol corrosion explosion failure mechanism 3-piece container
Unable to display preview. Download preview PDF.
- 1.M. Fox:A Review of Boiling Water Reactor Recirculation Inlet Nozzle Safe Ends, United States Nuclear Regulatory Commission Report NUREG/CR-5738, July 1991.Google Scholar
- 2.R.M. Kain: Crevice Corrosion,Corrosion, vol. 13,ASM Handbook, ASM International, 2001.Google Scholar
- 3.J.E. Neely and T.J. Bertone:Pratical Metallurgy and Materials of Industry, 5th ed., Prentice-Hall, Upper Saddle River, NY, 2000, p. 102, 275.Google Scholar
- 4.Glossary of Terms,Failure Analysis and Prevention, vol. 11,ASM Handbook, ASM International, 1998, p. 10.Google Scholar