Practical Failure Analysis

, Volume 1, Issue 4, pp 57–60 | Cite as

Hollow fibers can accelerate conductive filament formation

  • K. Rogers
  • C. Hillman
  • M. Pecht
Peer Reviewed Articles

Abstract

Increases in failures due to internal board shorting by conductive filament formation have driven glass and laminate manufacturers to consider screens and qualification tests to assess the hollow fiber concentration of circuit cards. This article describes the hollow fiber problem, methods to deter conductive filament formation, a hollow fiber screening technique, and the impact of next generation technology on conductive filament failure mechanism.

Keywords

conductive filament formation hollow fiber laminate printed wiring board 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    M. Pecht, C. Hillman, K. Rogers, and D. Jennings:Conductive Filament Formation: A Potential Reliability Issue in Laminated Printed Circuit Cards with Hollow Fibers, Vol. 22. No. 1, IEEE/CPMT, New York, NY, 1999, pp. 80–84.Google Scholar
  2. 2.
    K. Rogers, C. Hillman, M. Pecht, and S. Nachbor:Circuit World, 1999, vol. 25(3), pp. 6–8.CrossRefGoogle Scholar
  3. 3.
    K. Rogers, P.V.D. Driessche, C. Hillman, and M. Pecht:Printed Circuit Fabrication, 1999, vol. 22(4), pp. 34–38.Google Scholar
  4. 4.
    Anand A. Shukla, Terrance J. Dishongh, Michael Pecht, and David Jennings:Printed Circuit Fabrication, 1997, vol. 20(1), pp. 30–32.Google Scholar
  5. 5.
    A. Shukla, M. Pecht, J. Jordan, K. Rogers, and D. Jennings:Circuit World, 1997, vol. 23(2), pp. 5–6.CrossRefGoogle Scholar
  6. 6.
    Balu S. Rudra and Michael Pecht:IEEE Transactions on Components, Packaging and Manufacturing Techniques, Part B, vol. 17(3), IEEE, New York, NY, 1994, pp. 269–76.Google Scholar
  7. 7.
    Keith Rogers, Andre Fowler, and Michael Pecht:Circuit World, 1998, vol. 24(3), pp. 34–37.CrossRefGoogle Scholar
  8. 8.
    M. Li, M. Pecht, and L. Wang: inProceedings of the INTER-pack’95, T.R. Hsu, A. Bar-Cohen, and W. Nakayama, eds., ASME, New York, NY, 1995, pp. 517–27.Google Scholar
  9. 9.
    B. Rudra and D. Jennings:IEEE Transactions on Reliability, vol. 43(3), IEEE, New York, NY, 1994, pp. 354–60.Google Scholar
  10. 10.
    M. Pecht, B. Wu, and D. Jennings:13th IEEE International Electronics Manufacturing Technology Symposium, IEEE, New York, NY, 1992, pp. 74–79.Google Scholar
  11. 11.
    Simeon J. Krumbein:IEEE Trans. Components, Hybrids. Manufacturing. Technology, vol. CHMT-11, IEEE, New York, NY, 1988, pp. 5–15.Google Scholar
  12. 12.
    T.L. Welsher, J.P. Mitchell, and D.J. Lando: in18th Annual Proceedings of the International Reliability Physics Symposium, IEEE, New York, NY, 1980, p. 235.CrossRefGoogle Scholar
  13. 13.
    K.L. Loewenstein:The Manufacturing Technology of Continuous Glass Fibres, 2nd ed., Vol. 6, Elsevier Science Publishers, Amsterdam, 1983, pp. 25–50.Google Scholar
  14. 14.
    J.P. Mitchell and T.L. Weisher: inProceedings of the Printed Circuit World Convention II, Eugen G. Leuze Verlag, Saulgau/Wurtt, West Germany, 1981, p. 80.Google Scholar
  15. 15.
    D.J. Lando, J.P. Mitchell and T.L. Weisher: in17th Annual Proceedings of the International Reliability Physics Symposium, IEEE, New York, NY, 1979, p. 51.Google Scholar

Copyright information

© ASM International - The Materials Information Society 2001

Authors and Affiliations

  • K. Rogers
    • 1
  • C. Hillman
    • 1
  • M. Pecht
    • 1
  1. 1.CALCE Electronic Products and Systems CenterUniversity of MarylandCollege Park

Personalised recommendations