Practical Failure Analysis

, Volume 1, Issue 2, pp 59–69 | Cite as

Modeling the failure of hoisting load chain

  • J. J. Raphael
  • J. A. M. Boulet
Peer Reviewed Articles

Abstract

Electric chain hoists are often called upon to operate at or near their rated capacities at high duty cycles. A critical hoist component is its load chain, which is frequently manufactured from a carburizing, or case hardening, grade of nickel alloy steel. After thermal treatment, a chain link possesses a thin hard outer case and a tough inner core. Failure of load chain is frequently associated with pitting of the link surfaces that contact other links. Nonlinear finite element analysis of the stresses and deformations due to the contact of two chain links with each other are conducted. Results indicate that shakedown occurs after one or two load cycles and that the presence of friction alters the stress field so as to encourage pitting.

Keywords

chain contact friction pitting shakedown 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    K.L. Johnson:Contact Mechanics, Cambridge University Press, Cambridge, UK, 1985.Google Scholar
  2. 2.
    A.P. Boresi, R.J. Schmidt, and O.M. Sidebottom:Advanced Mechanics of Materials, 5th ed., John Wiley & Sons, New York, NY, 1993.Google Scholar
  3. 3.
    A.A. Becker:Introduction to Nonlinear Finite Element Analysis, Course Lecture Notes, University of Nottingham, Nottingham, United Kingdom, 1999.Google Scholar
  4. 4.
    H.R. Thomas and V.A. Hoersch:Bull. Eng., Experiment Station No. 212, University of Illinois, 1930.Google Scholar
  5. 5.
    A. Sackfield and D.A. Hills:J. Strain Anal. Eng. Des., 1983, vol. 18(2), pp. 101–105.CrossRefGoogle Scholar
  6. 6.
    J.J. Raphael:Residual Stress, Shakedown, and Failure in Carburized Hoisting Load Chain, Ph.D. Dissertation, University of Tennessee, Knoxville, TN, 2000.Google Scholar
  7. 7.
    D.A. Hills, D. Nowell, and A. Sackfield:Mechanics of Elastic Contacts, Butterworth-Heinemann, Ltd., Oxford, UK, 1993.Google Scholar
  8. 8.
    S. Way:J. Applied Mech., 1935, vol. 2, pp. 49–58.Google Scholar
  9. 9.
    A.R.S. Ponter, A.D. Hearle, and K.L. Johnson:J. Mech. Phys. Solids, 1985, vol. 33(4), pp. 339–62.CrossRefGoogle Scholar
  10. 10.
    J.P. Sheehan and M.A.H. Howes: SAE Technical Paper 72068, Society of Automotive Engineers, Warrendale, PA, 1977.Google Scholar

Copyright information

© ASM International - The Materials Information Society 2001

Authors and Affiliations

  • J. J. Raphael
    • 1
  • J. A. M. Boulet
    • 2
  1. 1.Hoist Division, Columbus-McKinnon CorporationDamascus
  2. 2.MAES DepartmentUniversity of TennesseeKnoxville

Personalised recommendations