Skip to main content
Log in

Modeling and simulation of a wet hemihydrate phosphoric acid process

  • Published:
Korean Journal of Chemical Engineering Aims and scope Submit manuscript

Abstract

The wet hemihydrate phosphoric acid process was modeled and simulated with some assumptions and simplifications. The process consisted of grinding unit, reaction section, filtration section, and hydration unit and steady-state operation was assumed. Modeling was based on actual operation data and models for each unit were combined to form the overall closed system. Results of simulations showed that the model developed in this study described the behavior of actual plant very well. Various sensitivity analyses for the fundamental parameters were performed using the model. In grinding section, the effect of specific breakage rate on particle size distribution was examined. It was possible to regulate the temperature of slurry at reaction and hydration stage by using slurry recycle ratio. The effects of the recycle ratio on phosphoric acid concentration were also investigated.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Austin, L, Shoji, K., Bhatia, V., Jindal, V. arid Savage, K., “Some Results on the Description of Size Reduction as a Rate Process in Various Mills”,Ind. Eng. Chem. Process Des. Dev.,15(1), 187 (1976).

    Article  CAS  Google Scholar 

  • Becker, P., “Phosphates and Phosphoric Arid”, Marcell Dekker Inc., New York (1989).

    Google Scholar 

  • Clayton, W. R. and Tanke, M. A., “Model and Applications of Heat and Material Balance Calculations in the Dihydrate Phosphoric Acid Process”, 188th ACS Meeting (1984).

  • Giola, F., Mura, G. and Viola, A., “Analysis, Simulation, and Optimization of the Hemihydrate Process for the Production of Phosphoric Acid from Calcareous Phosphorites”,Ind. Eng. Chem. Process Des. Dev.,16(3), 390 (1977).

    Article  CAS  Google Scholar 

  • Herbst, J. A. and Fuerstenau, D. W., “The Zero Order Production of Fine Sizes in Comminution and its Implications in Simulation”,Trans. SME/AIME,241, 538 (1968).

    Google Scholar 

  • Rajamani, R. K. and Herbst, J. A., “Optimal Control of a Ball Mill Grinding Circuit-I. Grinding Circuit Modeling and Dynamic Simulation”,Chem. Eng. Sci.,46(3), 861(1991).

    Article  CAS  Google Scholar 

  • Sluis, S., Meszaros, Y., Marchee, W. G. J., Wesselingh, H. A. and Rosmalen, G. M., “The Disgestion of Phosphate Ore in Phosphoric Acid”,Ind. Eng. Chem. Res.,26, 2501 (1987).

    Article  Google Scholar 

  • Yeo, Y. K., Cho, Y. S, Park, W. H. and Moon, B. K., “Simulation of the Dihydrate Process for the Production of Phosphoric Acid”,KIChE,8(1), 23(1991).

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Cho, H.J., Yeo, YK., Park, W.H. et al. Modeling and simulation of a wet hemihydrate phosphoric acid process. Korean J. Chem. Eng. 13, 585–595 (1996). https://doi.org/10.1007/BF02706025

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02706025

Key words

Navigation