Abstract
This article proposes a new method to the optimal target of a heat exchanger network synthesis problem of which data feature multiple pinch points. The system separation method we suggest here is to subdivide the original system into independent subsystems with one pinch point. The optimal cost target was evaluated and the original pinch rules at each subsystem were employed. The method is illustrated with two examples of which data features two pinch points.
Similar content being viewed by others
References
Jezowski, J., “The Pinch Design Method for Tasks with Multiple Pinches”,Computers Chem. Engng.,16, 129(1992).
Kim, S. W., Lee, H. P., Pek, U. H. and Park, S. W., “Synthesis of Heat Exchanger, Network by Optimizing the Minimum Temperature Difference”,HWAHAK KONGHAK,30, 318(1992).
Lee, H. P. and Yoo, K. O., “A Study on Optimal Heat Exchanger Network Synthesis Using System Separation Method”,HWAHAK KONGHAK,32, 288 (1994).
Lee, H. P., Hwang, K. G. and Yoo, K. O., “A Study on Synthesis of Heat Exchanger Network for Heat Recovery”,Energy Engg. J.,2, 215(1993).
Linnhoff, B. and Ahmad, S., “Cost Optimum Heat Exchanger Networks-1. Minimum Energy and Capital Using Simple Models for Capital Cost”,Computers Chem. Engng.,14, 729(1990).
Linnhoff, B. and Flower, J. R., “Synthesis of Heat Exchanger Networks: I. Systematic Generation of Energy Optimal Networks”,AIChE J.,24, 633 (1978).
Trivedi, K. K., O’Neill, B. K. and Roach, J. R., “Synthesis of Heat Exchanger Networks Featuring Multiple Pinch Points”,Computers Chem. Engng.,13, 291 (1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lee, HP., Lee, IY. & Yoo, KO. The system separation method for the optimal target of heat exchanger network synthesis with multiple pinches. Korean J. Chem. Eng. 12, 589–592 (1995). https://doi.org/10.1007/BF02705866
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705866