Abstract
The corrosion resistant oxide coatings, developed and applied by the conventional vitreous enamelling techniques, showed superior resistance to a range of mineral acids at various strengths and temperatures, alkaline solutions, boiling water and chrome plating solutions. These coatings possess considerable abrasion and impact resistance as well as high thermal shock resistance. The properties of the coating system have been studied in detail and found to be strongly dependent on composition and processing parameters. These coatings have been characterized by X-ray diffraction analysis and SEM studies. Some of the coating materials have been found to be biocompatible.
Similar content being viewed by others
References
Andrews A I 1961Porcelain enamels (Illinois, USA: The Garard Press)
Behrenbeck H and Patzke K 1985Vitreous Enameller 36 43
Briggs J and White D 1974Vitreous Enameller 25 25
Datta Someswar 1995Handbook of ceramics (ed.) S Kumar (Calcutta: Kumar & Associates) Vol. II, pp. 289–299
Datta S 1998Bull. Mater. Sci. 21 421
Hulbert S F, Hench L L, Forbes D and Bowman L S 1982-83Ceramurgia Int. 8-9 131
Maskal K A and White D 1986Vitreous enamelling: A guide to modern enamelling practice (London: Institute of Ceramics, Pergamon Press)
Pal S, Bhadra N and Datta S 1989Int. symposium on biomaterials in orthopaedics (Varanasi: BHU) p. 28
Pal S, Pal A, Datta S and Das S K 1990Ninth southern biomedical engineering conference (Miami, Florida, USA: Florida International University)
Phipps K J 1985Vitreous Enameller 36 1
Powder Diffraction File (revised) 1967 Pub. Joint Committee on Powder Diffraction Standards
Sen R, Datta S, Das S K and Basu S K 1989Wear 130 249
Svetlov V A, Pernov A A, Mirova T V and Bovkun N P 1983Glass Ceramics 40 574
Van Vlack Lawrence H 1977Materials science for engineers (London: Addison-Wesley publishing Co) p. 486
Vargin V V 1966Technology of enamels (London: Maclaren and Sons Ltd.)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Datta, S. Studies on broad spectrum corrosion resistant oxide coatings. Bull Mater Sci 24, 569–577 (2001). https://doi.org/10.1007/BF02704003
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02704003