References
V. G. Bazhenov, A. G. Ugodchikov, and A. P. Shinkarenko, “Numerical analysis of the elastoplastic deformation of shells with curvilinear openings under a pulsed loading,”Prikl. Mekh.,15, No. 5, 48–53 (1979).
A. N. Guz’, I. S. Chemyshenko, and K. I. Shnerenko,Spherical Bottoms Weakened by Openings [in Russian], Naukova Dumka, Kiev (1970).
E. A. Storozhuk, “Application of the finite-element method to solution of two-dimensional elastoplastic problems for shells with openings,”Dokl. Akad Nauk Ukr., No. 10,79-83 (1993).
E. A. Storozhuk and I. S. Chemyshenko, “Elastoplastic nonaxisymmetric deformation of shells with a curvilinear opening,”Prikl. Mekh.,22, No. 8, 53–59 (1986).
E. A. Storozhuk, I. S. Chemyshenko, and V. L. Yaskovets, “Elastoplastic state of spherical shells in the zone of an elliptical opening,”Prikl. Mekh., No. 7,44-50 (1989).
A. N. Guz’, I. S. Chemyshenko, V. N. Chekhov et al.,Theory of Thin Shells Weakened by Holes, in:Methods of Shell Design, Vol. 1 [in Russian], Naukova Dumka, Kiev (1980).
E. N. Troyak, E. A. Storozhuk, and I. S. Cherayshenko, “Elastoplastic state of a conical shell with a circular opening on the lateral surface,”Prikl. Mekh.,24, No. 1, 74–79 (1988).
I. S. Cherayshenko, “Nonlinear deformation of isotropic and orthotropic shells with openings reinforced by a rigid elastic element,”Prikl. Mekh.,25, No. 1, 66–71 (1989).
I. S. Cherayshenko, O. A. Chekin, Yu. M. Chemodanov et al., “Elastoplastic state of thin-wall structures with stress risers under small and large deformations,”Prikl Mekh.,19, No. 9, 50–58 (1983).
V. L. Yaskovets, E. L. Storozhuk, and I. S. Cherayshenko, “Elastoplastic equilibrium of a spherical shell in the form of an eccentric ring,”Prikl. Mekh.,26au]V. P. Mulyar, No. 1, 65–72 (1990).
Author information
Authors and Affiliations
Additional information
Translated from Prikladnaya Mekhanika, Vol. 34, No. 9, pp. 33–38, September, 1998
Rights and permissions
About this article
Cite this article
Mulyar, V.P. Numerical investigation of the elastoplastic state around an elliptical opening in cylindrical shells. Int Appl Mech 34, 840–845 (1998). https://doi.org/10.1007/BF02700841
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02700841