References
A. I. Golovanov and M. S. Kornishin, Introduction to the Method of Finite Elements in the Statics of Thin Shells [in Russian], Izd-vo Kazan. Fiz.-Tekh. In-ta, Kazan (1990).
E. A. Storozhuk, “Application of the method of finite elements to the solution of two-dimensional elastoplastic problems for shells with holes,” Dokl. Akad. Nauk Ukraina, No. 10, 79–83 (1993).
E. A. Storozhuk and I. S. Chernyshenko, “Shells with a curvilinear hole subjected to elastoplastic nonaxisymmetric strain,” Prikl. Mekh.,22, No. 8, 53–59 (1986).
E. A. Storozhuk, I. S. Chernyshenko, and V. L. Yaskovets, “Elastoplastic state of spherical shells in the zone of an elliptical hole,” Prikl. Mekh.,25, No. 7, 44–50 (1989).
A. N. Guz’, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes [in Russian] (vol. 1 of the series, Methods of Shell Computations, 5 vols.), Naukova Dumka, Kiev (1980).
R. S. Tennyson, D. K. Roberts, and D. Zimcik, “Analysis of the stress distribution around unreinforced cutouts of circular and cylindrical shells under axial compression,” NRC, NASA, Ann. Prog. Rept., UTJAS, 118–129 (1968).
Author information
Authors and Affiliations
Additional information
Translated from Prikladnaya Mekhanika, Vol. 33, No. 6, pp. 62–68, June, 1997.
Rights and permissions
About this article
Cite this article
Mulyar, V.P., Storozhuk, E.A. & Chemyshenko, I.S. Elastoplastic state of thin-walled cylindrical shells with elleptcal hole on the lateral face. Int Appl Mech 33, 485–490 (1997). https://doi.org/10.1007/BF02700658
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02700658