Abstract
A modified impact probe for continuous measurement of solids circulation rate in a circulating fluidized bed has been developed based on a principle similar to a momentum probe. The response curves of solid flow from the probe have been characterized and calibrated in a test column (0.05 m-I.D.x0.80 m-high). The probe was validated in situ in the downcomer of a circulating fluidized bed (0.10 m-I.D.x4.80 m-high). The solid circulation rates obtained by the modified impact probe well agree with the measured solids circulation rate by the descent time method.
Similar content being viewed by others
References
Bai, D., Shibuya, E., Masuda, Y, Nishio, K., Nakagawa, N. and Kato, K., “Distinction Between Upward and Downward Flows in Circulating Fluidized Beds”,Powder Technol.,84, 75 (1995).
Burkell, J. J., Grace, J. R., Zhao, J. and Lim, C. I., “Measurement of Solids Circulation Rates in Circulating Fluidized Bed”, CFB Technology II, Basu, P. and Large, J. F., eds., Pergamon Press, New York, 501 (1988).
Choi, J. H., Choi, K. B., Kim, P., Shun, D. W. and Kim, S. D., “Effect of Temperature on Particle Entrainment in a Gas Fluidized Bed,”HWAHAK KONGHAK,33, 580 (1995).
Harris, B. J., Davies, C. E. and Davidson, J. E., “The Slot Flow Meter: A New Device for Continuous Solids Flow Measurement;Chem. Eng. Sci.,52,4637 (1997).
Kim, S. W., Namkung, W. and Kim, S. D., “Solids Flow Characteristics in Loop-seal of a Circulating Fluidized Bed,”Korean J. Chem. Eng.,16, 82 (1999).
Louge, M., “Circulating Fluidized Beds,” Grace, J. R., Avidan, A. A. and Knowlton, T M., eds., Blackie Academic and Professional, UK, 336 (1997).
Namkung, W. and Kim, S. D., “Gas Backmixing in a Dense Region of Fluidized Bed”,Korean J. Chem. Eng.,16,456 (1999).
Patience, G. S. and Chaouki, J., “Solids Circulation Rate Determined by Pressure Drop Measurement”, CFB Technology III, Basu, P., Horio, M. and Hasatani, M., eds., Pergamon Press, Oxford, 627 (1991).
Rhodes, M. J., Sollaart, M. and Wang, X. S., “Flow Structure in a Fast Fluid Bed”,Powder Technol,99,194 (1998).
Yang, W., Ettehadieh, E. and Haldipur, G. B., “Solids Circulation Pattern and Particles Mixing in a Large Jetting Fluidized Bed”,;AIChE J.,32,1994 (1986).
Zhang, W., Johnsson, F. and Leckner, B., “Momentum Probe and Sampling Probe for Measurement of Particle Flow Properties in CFB Boilers”,Chem. Eng. Sci.,52,497 (1997).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, S.W., Ahn, J.Y., Lee, D.H. et al. Continuous measurement of solids flow in a circulating fluidized bed. Korean J. Chem. Eng. 18, 555–560 (2001). https://doi.org/10.1007/BF02698305
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02698305