Skip to main content
Log in

Selective and complete catalytic oxidation of natural gas in Turbulent Fluidized Beds

  • Published:
Korean Journal of Chemical Engineering Aims and scope Submit manuscript

Abstract

Turbulent Fluidized Bed (TFB) reactors appears to be ideal for exothermic and fast reactions such as catalytic oxidation of methane. In this paper, a use of TFB reactor for two catalytic oxidation of methane: catalytic combustion of methane and catalytic selective oxidation of methane for the ethylene synthesis is described. Catalytic fluidized bed combustion of methane is shown to be an emerging technology capable of meeting all environmental constraints as far as nitrogen oxides and carbon monoxide are concerned. This reaction carried out in both the bubbling and the turbulent regimes at 450-500 ‡C shows that the turbulent regime is more favourable. A self-sustained combustion with complete conversion and a zero emission of NOx and CO was achieved with a mixture of 4% methane in air at 500 ‡C. The two-phase model of Werther [1990], which phenomenologically introduces the enhancement factor due to chemical reaction, predicts quite well the combustor performance. The same model but without enhancement factor (slower reactions) predicts satisfactorily the experimental data for the oxidative coupling of methane and can be used to quantify the influence of homogeneous and catalytic reactions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Abed, R., “Fluidization,” Kunii, D., et Toei, R. eds., Engineering Foundation,137, 7 (1994).

  • Al-Zahrani, S., Song, Q. and Lobban, L., “Effects of CO2 during Oxidative Coupling of Methane over Li/MgO: Mechanisms and Models,”Ind. Eng. Chem. Res.,33, 251 (1994).

    Article  CAS  Google Scholar 

  • Avidan, A., “Turbulent Fluid Bed Reactors using Fine Powder Catalysts,” AIChE-CIESCMtg Beijing, 411 (1982).

  • Berruti F., Chaouki, J., Godfrey, L., Pugsley, T. S. and Patience, G. S., “Hydrodynamics of Circulating Fluidized Bed Risers: a Review,”Can. J. Chem.,73, 579 (1995).

    CAS  Google Scholar 

  • Bi, H. T. and Grace, J. R., “Effect of Measurement Method on the Velocities Used to Demarcate the Onset of Turbulent Fluidization,”Chem. Eng. J.,57, 261 (1995).

    CAS  Google Scholar 

  • Cai, P., Jin, Y., Yu, Z. Q. and Wang, Z. W., “Mechanism of Flow Regime Transition from Bubbling to Turbulent Fluidization,”AIChE J.,36,955(1990).

    Article  CAS  Google Scholar 

  • Chaouki, J., Guy, C., Sapunzhiev, C. and Klvana, D., “Combustion of Methane in a Cyclic Catalytic Reactor,”Ind. Eng. Chem. Res.,33, 2957 (1994).

    Article  CAS  Google Scholar 

  • Chaouki, J., Gonzalez, A., Guy, C. and Klvana D., “Two-Phase Model for a Catalytic Turbulent Fluidized Bed Reactor : Application to Ethylene Synthesis,”Chem. Eng. Sci., accepted (1999).

  • Chehbouni, A., Chaouki, J., Guy, C. and Klvana, D., “Characterization of the Flow Transition between Bubbling and Turbulent Fluidization,”Ind. Eng. Chem. Res.,3, 324 (1994).

    Google Scholar 

  • Chehbouni, A., Chaouki, J., Guy, C. and Klvana, D., “Effets de différents paramètres sur la vitesse de transition de la fluidisation en régime turbulent,”Can. J. Chem. Eng.,4, 134 (1993).

    Google Scholar 

  • Davidson, J. F. and Harrison, D., “Fluidization,” Cambridge University Press, New York (1963).

    Google Scholar 

  • Foka, M., Chaouki, J., Guy, C. and Klvana, D., “Gas Phase Hydrodynamics of a Gas-Solid Fluidized Bed,”Chem. Eng. Sci.,51(5), 713 (1996).

    Article  CAS  Google Scholar 

  • Foka, M., Chaouki, J., Guy, C. and Klvana, D., “Natural Gas Combustion in a Catalytic Turbulent Fluidized Bed,”Chem. Eng Sci.,49(24), 4269 (1994).

    Article  CAS  Google Scholar 

  • Grace, J. R. and Sun, G., “Influence of Particle Size Distribution on the Performance of Fluidized Bed Reactors,”Can. J. Chem. Eng.,69, 1126(1991).

    CAS  Google Scholar 

  • Grace, J. R., “High Velocity Fluidized Beds Reactors,”Chem. Eng Sci.,45(8), 1953 (1990).

    Article  CAS  Google Scholar 

  • Horio, M., “Hydrodynamics,” in Circulating Fluidized Beds, ed. Grace, J. R., Avidan, A. A. and Rnowlton, T. M., Blackie Academic & Professional, London 1-21-85 (1997).

    Google Scholar 

  • Horio, M., “The Onset of Turbulent Fluidized Beds,”J. Soc. Powder Tech. Japan,23, 20 (1986).

    Google Scholar 

  • Kehoe, P. W. K. and Davidson, J. F., “Continuously Slugging Fluidized Beds,”Instn. Chem. Engrs. Sym. Sen,33, 97 (1971).

    Google Scholar 

  • Lanneau, K. P., “Gas-solids Contacting in Fluidized Bed,”Trans IChemE,38, 125 (1960).

    CAS  Google Scholar 

  • Lee, G. S. and Kim, S. D., “Gas Mixing in Slugging and Turbulent Fluidized Beds,”Chem. Eng. Comm.,86, 91 (1989).

    Article  CAS  Google Scholar 

  • Massimilla, L., “Behavior of Catalytic Beds of Fine Particles at High Gas Velocities,”AIChE Symp Ser,69, 11 (1973).

    CAS  Google Scholar 

  • Massimilla, L., “In Fluidization,” 2nd edition Academic Press, New York (1985)

    Google Scholar 

  • May, W. G., “Fluidized Bed Reactor Studies,”Chem. Eng. Progr.,55, 49 (1959).

    Google Scholar 

  • Miwa, K., Mori, S., Kato, T. and Muchi, I., “Mixing and Contacting in Gas-Solid Fluidized Beds,”Chem. Eng.,12, 187 (1972).

    Google Scholar 

  • Mleczko, L., Andorf, R. and Baerns, M., “Prediction of the Performance of a Fluidized Bed Reactor for the Catalytic Oxidative Methane Coupling to C2 Hydrocarbons,” AICHE Annual Meeting, Nov. 11–16, Chicago (1990).

  • Mori, S. and Wen, C. Y., “Estimation of Bubble Diameter in Gaseous Fluidized Beds,”AIChE J.,20, 109 (1975).

    Article  Google Scholar 

  • Rowe, P. N. and MacGillivray, H. J., In “Fluidization,” Edited by Grace, J. R. and Matsen J. M., New York, 545 (1980).

  • Van Deemter, J. J., “Mixing Patterns in Large-scale Fluidized Beds,”Chem. Eng Sci.,13, 143 (1961).

    Article  Google Scholar 

  • Van Swaij, V P. M. and Zuiderweg, F. J., Proc. Inter. Symp. on Fluidization and Its Applications. Edited by Cepadues, Toulouse, France, 454 (1973).

  • Van Swaij, V. P. M., “The Design of Gas-solids Fluid Bed and Related Reactor,”ACS Symp Sen,72, 193 (1978).

    Article  Google Scholar 

  • Wen, C. Y., “Chemical Reaction in Fluidized Beds,” In Recent Advances in the Engineering Analysis of Chemically Reacting Systems,” Edited by Doraisamy, L. K., Wiler Eastern, New Delhi, 256 (1984).

    Google Scholar 

  • Werther, J., “Mathematical Modeling of Fluidized Bed Reactors,”Intern. Chem. Eng.,20(4), 529 (1980).

    Google Scholar 

  • Zenz, F. A., “Two Phase Fluid-Solid Flow,”Ind. Eng. Chem.,41, 2801 (1949).

    Article  CAS  Google Scholar 

  • Zhang, W, Tung, Y. and Johnson, F., “Radial Voidage Profiles in Fast Fluidized Beds of Differents Diameters,”Chem. Eng. Sci.,46,3045(1991).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jamal Chaouki.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chaouki, J., Klvana, D. & Guy, C. Selective and complete catalytic oxidation of natural gas in Turbulent Fluidized Beds. Korean J. Chem. Eng. 16, 494–500 (1999). https://doi.org/10.1007/BF02698274

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02698274

Key words

Navigation