Abstract
The pitting susceptibility of a variously machined binary iron-1 wt pct nickel alloy in 5 M sodium hydroxide solution at 373 K has been measured and correlated with the surface residual macrostress introduced by the machining process. Stresses were measured using the X-ray diffractometer technique. Tensile surface residual macrostresses increase the corrosion pitting susceptibility whereas compressive stresses decrease susceptibility.
Similar content being viewed by others
References
D. Kalderon:Proc. Inst. Mech. Eng., 1972, vol. 186, p. 341.
C. E. Stromeyer:J. Iron Steel Inst., 1909, vol. 79, p. 404.
P. Doig and P. E. J. Flewitt:Mechanisms of Environment Sensitive Cracking of Materials, Metals Society, Guildford, 1977.
O. Lissner:ASEA J., 1957, vol. 34, p. 85.
C. Gibb: Inst. Mech. Eng. Publ. 169, vol. 29, p. 511, 1954.
W. C. Schroeder and A. A. Berk: U S Bureau of Mines Bulletin, U S Government Printing Office, 1941.
N. L. Evans:Foundry Trade J., 1940, vol. 62, p. 102.
H. W. Schmidt:Corrosion, 1951, vol. 7, p. 295.
F. A. Champion:Chem. Ind., 1957, vol. 77, p. 967.
J. P. Hammond, P. Patriarca, G. M. Slaughter, and W. A. Maswell:Mater. Perform., 1975, vol. 14, p. 40.
B. F. Brown:The Theory of Stress Corrosion Cracking in Alloys, J. C. Scully, ed., p. 186, N.A.T.O. Brussels, 1971.
G. V. Akimov:Theory and Research Methods of Metallic Corrosion, Academy of Science, Moscow, 1945.
L. L. Shreir:Corrosion, Newnes-Butterworth, London, 1976.
H. H. Uhlig:Corrosion, 1963, vol. 19, p. 231.
D. Lewis, D. O. Northwood, and C. E. Pearce:Corros. Sci., 1969, vol. 9, p. 779.
J. T. Waber:Corrosion, 1957, vol. 13, p. 25.
C. Wagner:Plating, 1961, vol. 52, p. 997.
C. Wagner:J. Electrochem. Soc, 1951, vol. 98, p. 116.
H. T. Simnad and U. R. Evans:Trans. Faraday Soc, 1950, vol. 46, p. 1975.
K. Nobe, E. Baum, and W. F. Seyer:J. Electrochem. Soc, 1961, vol. 108, p. p. 97.
A. Windfeldt:Electrochim. Acta., 1964, vol. 9, p. 125.
L. Rozeanu:Wear, 1967, vol. 10, p. 27.
J. A. Marquez, I. Matsushima, and H. H. Uhlig:Corrosion, 1970, vol. 26, p. 215.
A. Pickett and R. G. Sim:Mater. Prot. Perform., 1973, vol. 6, p. 39.
N. A. Nielsen:Corrosion, 1971, vol. 27, p. 173.
J. C. Scully:Corros. Sci, 1968, vol. 8, p. 759.
H. H. Uhlig, K. E. Perumal, and M. Talerman:Corrosion, 1974, vol. 30, p. 229.
R. M. Latanision and P. W. Staehle:Fundamental Aspects of Stress Corrosion Cracking, R. W. Staehle, ed., p. 214, N.A.C.E., Houston, 1969.
D. Chastell, P. Doig, P. E. J. Flewitt, and K. Ryan:Corros. Sci, in press.
P. Doig and P. E. J. Flewitt: CEGB Report SSD/SE/R94/77,1977, andPhil Mag. B, 1978, vol. 38, p. 27.
B. G. Ateya and H. W. Pickering:J. Electrochem. Soc., 1975, vol. 122, p. 1018.
M. H. Peterson and T. J. Lennox:Corrosion, 1973, vol. 29, p. 406.
I.L. Rosenfeld and I.K. Marshakov:Corrosion, 1964, vol. 20, p. 115.
M. Pourbaix:Corros. Sci, 1972, vol. 12, p. 161.
T. Suzuki, M. Yamabe, and Y. Kitamura:Corrosion, 1973, vol. 29, p. 18.
H. H. Strehblow and M. B. Ives:Corros. Sci., 1976, vol. 16, p. 317.
A. A. Denton:Met. Rev., 1966, 101, vol. 11, p. 1.
J. Frisch and E. G. Thomsen:Trans. ASME, 1951, vol. 72, p. 377.
H. R. Letner:Trans. ASME, 1951, vol. 72, p. 1089.
U. P. Tekht and S. N. Kupershotok:Engeromashinostroenie, 1966, vol. 12, p. 40.
K. Tanaka:J. Strain Anal, 1975, vol. 10, p. 32.
A. L. Esquivel and K. P. Evans:Exp. Meek, 1968, vol. 8, p. 496.
P. Doig and P. E. J. Flewitt:Strain, 1977, vol. 13, p. 102.
P. Doig and P. E. J. Flewitt:Phil Mag., 1977, vol. 35, p. 1063.
B. D. Cullity:Elements of X-ray Diffraction, Addison-Wesley, Reading, Mass., 1956.
P. Doig, R. J. Browne, and P. E. J. Flewitt:Br. Corros. J., 1977, vol. 12, p. 86.
A. S. Keh and S. Weissman:Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., p. 231, Interscience, N.Y., 1963.
A. S. Keh:Phil Mag, 1965, vol. 12, p. 9.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Doig, P., Flewitt, P.E.J. The contribution of machine-induced residual stress to the pitting susceptibility of an Iron-1 Wt Pct nickel binary alloy. Metall Trans A 10, 413–418 (1979). https://doi.org/10.1007/BF02697067
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02697067