Abstract
Isostatic compaction of a porous billet in an incompressible container is considered. The behavior of the container as well as the matrix phase of a porous billet is assumed to be described by power law equations. Macroscopic deformation of a billet is controlled by flow theory for a compressible body with a smooth potential. It is established that the stressed state in a billet is not isostatic.
Similar content being viewed by others
References
J. Xu and R. M. McMeecing, “An analysis of the can effect is isostatic pressing of copper powder,” Int. J. Mech. Sci.,34, No. 2, 167–174 (1992).
G. S. Garibov, B. A. Druyanov, and V. N. Samarov, et al., “Hot isostatic pressing process parameters for granular materials in a shell,” Poroshk. Metall., No. 7, 12–17 (1979).
B. A. Druyanov, Applied Plasticity Theory for Porous Bodies [in Russian], Mashinostroenie, Moscow (1989).
R. M. McMeecing, “The analysis of shape change during isostatic pressing,” Int. J. Mech. Soc.,34, No. 1, 53–62 (1992).
N. A. Fleck, L. T. Kuhn, and R. M. McMeecing, “Yielding of a metal powder bounded by, isolated contacts,” J. Mech. Phys. Solids,40, 1139–1162 (1992).
M. B. Shtern, “Development of powder pressing theory and a theory for porous body plasticity,” Poroshk. Metall., No. 9, 13–25 (1992).
M. Abouaf, G. Chenot, G. Raisson, et al., “Finite element simulation of hot isostatic pressing of metal powder,” Int. J. Num. Meth. Eng.,25, 191–212 (1988).
G. L. Petrosyan, Plastic Deformation of Powder Materials [in Russian], Metallurgiya, Moscow (1988).
A. M. Laptev, “Compaction of porous isotropic materials under plane strain conditions,” Izv. Vyssh. Uchebn. Zaved., Mashinostroenie, No. 2, 158–163 (1978).
V. V. Skorokhod, M. B. Shtern, and I. F. Martynova, “Nonlinear-viscous and plastic flow of porous bodies,” Poroshk. Metall., No. 8, 12–17 (1987).
A. C. F. Cocks, “The structure of, constitutive laws for the sintering of fine grained materials,” Acta Metall. Mater.,42, No. 7, 1911–2210 (1994).
S. Shima and M. Oyane, “Plasticity theory for porous metals,” Int. J. Mech. Sci., No. 6, 285–291 (1976).
C. Argento and D. Bouvard, “Numerical simulation of hot isostatic pressing of metal powder: influence of constitutive equations,” in: Proc. of Powder Metallurgy World Congress, Paris (1994), pp. 725–728.
Additional information
Materials Science Institute, Ukrainian Academy of Sciences, Kiev. Translated from Poroshkovaya Metallurgiya, Nos. 1–2, pp. 36–42, January–February, 1997.
Rights and permissions
About this article
Cite this article
Skorokhod, V.V., Shtern, M.B. & Panfilov, Y.A. Effect of a shell on the change in shape of a porous billet during isostatic pressing. 1. stress deviator with isostatic pressing. Powder Metall Met Ceram 36, 35–40 (1997). https://doi.org/10.1007/BF02684249
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02684249