Skip to main content
SpringerLink
Log in

The pipette aspiration applied to the local stiffness measurement of soft tissues

  • Technical Report
  • Published:
Annals of Biomedical Engineering Aims and scope Submit manuscript

Abstract

A simple method of identifying the initial slope of the stress-strain curve (i.e., Young's modulus of the soft tissue) by introducing the pipette aspiration technique is presented. The tissue was assumed to be isotropic and macroscopically homogeneous. Numerical simulations by the linear finite element analysis were performed for the axisymmetric model to survey the effects of friction at the tissue-pipette contact boundary, pipette cross-sectional geometry, relative size of the specimen to the pipette, and the layered inhomogeneity of the specimen tissue. The friction at the contact region had little effect on the measurement of Young's modulus. The configuration of the pipette was shown to affect the measurement for small pipette wall thickness. The measurement also depended on the relative size of the specimen to the pipette for relatively small specimens. The extent of the region contributing to the measurement was roughly twice the inside radius of the pipette. In this region, the maximum stress did not exceed the level of the aspiration pressure, with only minor exceptional locations. Calculation of strain energy components indicated that the major contributions to the deformation under pipette aspiration were by the normal extension and shear deformation in pipette axial direction. Experimental verification of the present method for the isotropic, homogeneous artificial material is also presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Cook, T., H. Alexander, M. L. Cohen. Experimental method for determining the 2-dimensional mechanical properties of living human skin.Med. Biol. Eng. Comput. 15:381–390, 1977.

    Article  PubMed  CAS  Google Scholar 

  2. Evans, E. A. New membrane concept applied to the analysis of fluid shear- and micropipette-deformed red blood cells.Biophys. J. 13:941–954, 1973.

    PubMed  CAS  Google Scholar 

  3. Fung, Y. C. Biomechanics: Mechanical Properties of Living Tissues. New York: Springer-Verlag, 1981, 433 pp.

    Google Scholar 

  4. Glagov, S., C. K. Zarins, D. P. Giddens and H. R. Davis. Atherosclerosis: what is the nature of the plaque? In: Vascular diseases: current research and clinical applications edited by D. E. Strandness, P. Didisheim, J. T. Watson, and A. W. Clowes. Orlando: Grune & Stratton, 1987, pp. 15–33.

    Google Scholar 

  5. Gow, B. S., and R. M. Vaishnav. A microindentation technique to measure rheological properties of the vascular intima.J. Appl. Physiol. 38:344–350, 1975.

    PubMed  CAS  Google Scholar 

  6. Gow, B. S., W. D. Castle, and M. J. Legg. An improved microindentation technique to measure changes in properties of arterial intima during atherogenesis.J. Biomech. 16:451–458, 1983.

    Article  PubMed  CAS  Google Scholar 

  7. Kataoka, N., T. Ohashi, T. Matsumoto, T. Aoki, and M. Sato. Application of the pipette aspiration technique to the measurement of local elastic moduli of cholesterol-fed rabbit aortas. In: Theoretical and applied mechanics, vol. 43, edited by M. Hori and T. Nakamura. Tokyo: The Japan National Committee for Theoretical and Applied Mechanics, 1994, pp. 233–238.

    Google Scholar 

  8. Loree, H. M., A. J. Grodzinsky, S. Y. Park, L. J. Gibson, and R. T. Lee. Static circumferential tangential modulus of human atherosclerotic tissue.J. Biomech. 27:195–204, 1994.

    Article  PubMed  CAS  Google Scholar 

  9. Richardson, P. D., M. J. Davies, and G. V. R. Born. Influence of plaque configuration and stress distribution on fissuring of coronary atherosclerotic plaques.Lancet 2:941–944, 1989.

    Article  PubMed  CAS  Google Scholar 

  10. Sato, M., M. J. Levesque, and R. M. Nerem. An application of the micropipette technique to the measurement of the mechanical properties of cultured bovine aortic endothelial cells.ASME J. Biomech. Eng. 109:27–34, 1987.

    CAS  Google Scholar 

  11. Theret, D. P., M. J. Levesque, M. Sato, R. M. Nerem, and L. T. Wheeler. The application of a homogeneous half-space model in the analysis of endothelial cell micropipette measurements.ASME J. Biomech. Eng. 110:190–199, 1988.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Aeronautics and Astronautics, University of Tokyo, Bunkyo-ku, 113, Tokyo, Japan

    Takahira Aoki

  2. Department of Mechatronics and Precision Engineering, Tohoku University, Sendai, Japan

    Toshiro Ohashi, Takeo Matsumoto & Masaaki Sato

Authors
  1. Takahira Aoki
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Toshiro Ohashi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Takeo Matsumoto
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Masaaki Sato
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Aoki, T., Ohashi, T., Matsumoto, T. et al. The pipette aspiration applied to the local stiffness measurement of soft tissues. Ann Biomed Eng 25, 581–587 (1997). https://doi.org/10.1007/BF02684197

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02684197

Keywords

Search

Navigation