Abstract
A finite-difference method was proposed and used for analysis of critical loads of shells that have initial imperfections of different types, both regular and local. Ribbed shells were analyzed with allowance for the discreteness in the arrangement of the ribs.
Similar content being viewed by others
References
I. Ya. Amiro, “The effect of initial deflections on the stability of ribbed cylindrical shells under axial compression,”Prikl. Mekh.,11, No. 1, 53–58 (1966).
I. Ya. Amiro and V. A. Zarutskii,The Theory of Ribbed Shells, Vol. 2 of the five-volumeMethods of Shell Analysis [in Russian], Naukova Dumka, Kiev (1973).
I. Ya. Amiro, P. S. Polyakov, and V. G. Palamarchuk, “The stability of cylindrical shells with an imperfect shape,”Prikl. Mekh.,7, No. 8, 9–15 (1971).
V. A. Voblykh, “The effect of initial deviations on the value of the critical load for circular cylindrical shells,”Prikl. Mekh.,1, No. 3, 17–26 (1965).
A. S. Vol'mir,The Stability of Deformable Systems [in Russian], Nauka, Moscow (1967).
G. D. Gavrilenko, “Numerical algorithm of stability analysis of constructively orthotropic shells under arbitrary boundary conditions,” in:Fluid Mechanics and Theory of Elasticity [in Russian],14 (1972), pp. 131–138.
G. D. Gavrilenko, “Stability of imperfect cylindrical shells,”Dokl. AN USSR, Ser. A, No. 7, 523–528 (1979).
G. D. Gavrilenko,Stability of Ribbed Cylindrical Shells in Inhomogeneous Stress-Strain State [in Russian], Naukova Dumka, Kiev (1989).
G. D. Gavrilenko, S. S. Khalyuk, A. S. Sytnik, and A. A. Rudometkin,Algorithms and Programs of Strength and Stability Analysis of Ribbed Shells [in Russian], Est. NIINTI, Tallin (1990).
G. D. Gavrilenko, “Stability of smooth and ribbed rotational shells in inhomogeneous stress-strain state (review),”Prikl. Mekh.,31, No. 7, 3–25 (1995).
M. S. Kornishin,Nonlinear Problems of the Theory of Plates and Shallow Shells and Methods of Their Solution [in Russian], Nauka, Moscow (1964).
V. K. Kuznetsov and Yu. V. Lipovtsev, “The effect of local imperfections on the stability of a cylindrical shell under axial compression,”Mekh. Tverd. Tela, No. 1, 134–136 (1970).
V. I. Étokov, “Examination of the stability of imperfect ribbed cylindrical shells,”Mekh. Tverd. Tela, No. 12, 70–76 (1979).
J. Arbocz and C. D. Babcock, “The effect of general imperfections on the buckling of cylindrical shells,”J. Appl. Mech., Ser. E,36, No. 1, 28–38 (1969).
J. Singer, J. Arbocz, and C. D. Babcock, “Buckling of imperfect stiffened cylindrical shells under axial compression,”AIAA J.,9, No. 1, 68–75 (1971).
L. H. Donnell, “A new theory for the buckling of thin cylinders under axial compression and bending,”Trans. ASME,56, 795–806 (1934).
Additional information
S. P. Timoshenko Institute of Mechanics, National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 35, No. 12, pp. 33–39, December, 1999.
Rights and permissions
About this article
Cite this article
Gavrilenko, G.D., Matsner, V.I. & Sytnik, A.S. Stability of ribbed cylindrical shells with a nonideal shape. Int Appl Mech 35, 1222–1228 (1999). https://doi.org/10.1007/BF02682395
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02682395