Abstract
The results of stability analysis of ribbed shells performed on the basis of the techniques developed by I. Ya. Amiro and his followers are reviewed. Attention is focused on the features of their buckling due to the discrete arrangement of ribs.
Similar content being viewed by others
References
I. Ya. Amiro, “Stability analysis of a ribbed cylindrical shell under longitudinal compression,”Prikl. Mekh.,6, No. 3, 272–281 (1960).
I. Ya. Amiro, “The stability of a ribbed cylindrical shell under longitudinal compression,”Dop. Akad. Nauk Ukrainy, No. 10, 1344–1348 (1960).
I. Ya. Amiro, “Analysis of the ultimate load for ribbed cylindrical shells under the concurrent action of axial forces and internal pressure,”Prikl. Mekh.,7, No. 5, 496–502 (1961).
I. Ya. Amiro, “Stability analysis of a ribbed cylindrical shell under eccentric compression,”Prikl. Mekh.,8, No. 4, 359–367 (1962).
I. Ya. Amiro, “The stability of thin cylindrical shells,”Prikl. Mekh.,9, No. 3, 264–269 (1963).
I. Ya. Amiro, “Analysis of the stability and supercritical strains of ribbed cylindrical shells under axial compression,”Prikl. Mekh.,1, No. 10, 30–37 (1965).
I. Ya. Amiro, “The effect of the initial deflections on the stability of ribbed cylindrical shells under axial compression,”Prikl. Mekh.,2, No. 1, 53–58 (1966).
I. Ya. Amiro, “Studying the influence of the reinforcement parameters of ribbed cylindrical shells on the critical axial load,”Prikl. Mekh.,5, No. 2, 71–78 (1969).
I. Ya. Amiro, “Stability analysis of ribbed cylindrical shells,”Prikl. Mekh.,8, No. 12, 15–24 (1972).
I. Ya. Amiro, “Determination of critical compressive forces rapidly increasing in time,”Prikl. Mekh.,15, No. 5, 54–60 (1979).
I. Ya. Amiro, “Determination of the critical dynamic load (a step impulse),”Prikl. Mekh.,16, No. 8, 75–83 (1980).
I. Ya. Amiro, “Determination of the critical parameters of a load rapidly decreasing in time (a triangular impulse),”Prikl. Mekh.,16, No. 1, 70–76 (1980).
I. Ya. Amiro, “Determination of the critical parameters of short-term external pressure for spherical shells,”Prikl. Mekh.,17, No. 9, 34–38 (1981).
I. Ya. Amiro, “The stability of a ribbed spherical shell under static and dynamic external pressure,”Prikl. Mekh.,17, No.9, 51–60 (1981).
I. Ya. Amiro, “Determination of the critical parameters of short-term external pressure for a spherical shell with an initial deflection,”Prikl. Mekh.,23, No. 10, 7–12 (1987).
I. Ya. Amiro, “The stability of a ribbed spherical shell with an initial deflection,”Prikl. Mekh.,24, No. 7, 58–63 (1988).
I. Ya. Amiro, “Efficiency analysis of the reinforcement of a spherical shell with an initial deflection under static external pressure,”Prikl. Mekh.,25, No. 4, 17–24 (1989).
I. Ya. Amiro, “Analysis of the local stability of a ribbed spherical shell with an initial deflection,”Prikl. Mekh.,25, No. 10, 47–56 (1989).
I. Ya. Amiro, “Studying the influence of the dimensions of an initial dent and the reinforcement characteristics on the critical parameters of short-term external pressure for a spherical shell,”Prikl. Mekh.,26, No. 9, 29–36 (1990).
I. Ya. Amiro, O. A. Grachev, V. A. Zarutskii, et al.,The Stability of Ribbed Shells of Revolution [in Russian], Naukova Dumka, Kiev (1987).
I. Ya. Amiro, and O. A. Grachev, “The stability of spherical reinforced shells (review),”Prikl. Mekh.,22, No. 11, 3–17 (1986).
I. Ya. Amiro, G. I. Diamant, and V. A. Zarutskii, “Determination of the critical stresses in cylindrical shells compressed along the axis and reinforced with longitudinal ribs,”Prikl. Mekh.,11, No. 12, 3–8 (1975).
I. Ya. Amiro, G. I. Diamant, and V. A. Zarutskii, “The buckling modes of longitudinally reinforced shells,”Prikl. Mekh.,13, No. 9, 115–117 (1977).
I. Ya. Amiro, G. I. Diamant, V. A. Zarutskii, et al., “The axial-compression stability of a cylindrical shell strengthened with two systems of cross ribs,”Soprot. Mater. Teor. Sooruzh., No. 28, 17–28 (1976).
I. Ya. Amiro and V. A. Zarutskii,Methods of Shell Design, Vol. 2 of the seriesTheory of Ribbed Shells [in Russian], Naukova Dumka, Kiev (1980).
I. Ya. Amiro, and V. A. Zarutskii, “Stability analysis of ribbed shells,”Prikl. Mekh.,19, No. 11, 3–20 (1983).
I. Ya. Amiro and V. A. Zarutskii, “The statics, dynamics, and stability of ribbed shells,”Itogi Nauki Tekh. VINITI, Ser. Mekh. Tverd. Deform. Tela,21, 132–191 (1990).
I. Ya. Amiro and V. A. Zarutskii, “Experimental investigations of the stability of ribbed shells (review),”Prikl. Mekh.,32, No. 9, 3–15 (1996).
I. Ya. Amiro, V. A. Zarutskii, I. F. Larianov, et al., “The influence of the eccentricity of ribs on the critical stresses of axial compression for cylindrical shells,”Prikl. Mekh.,10, No. 12, 31–45 (1974).
I. Ya. Amiro, V. A. Zarutskii and V. I. Matsner, “The influence of the eccentricity of ribs on the stability of cylindrical shells under axial compressive forces and internal pressure,”Stroit. Mekh. Raschet. Sooruzh., No. 1, 25–27 (1975).
I. Ya. Amiro, V. A. Zarutskii, and P. S. Polyakov,Ribbed Cylindrical Shells [in Russian], Naukova Dumka, Kiev (1973).
I. Ya. Amiro and A. S. Pal'chevskii, “Reinforcement optimization of longitudinally compressed cylindrical shells,”Prikl. Mekh.,11, 31–35 (1975).
I. Ya. Amiro and A. S. Pal'chevskii, “The influence of the polynomial approximation of a deflection on the critical stresses of axial compression of stringer cylindrical shells,”Soprot. Mater. Teor. Sooruzh., No. 29, 25–28 (1976).
I. Ya. Amiro, A. S. Pal'chevskii, and P. S. Polyakov, “The axial-compression stability of a ribbed cylindrical shell with large rectangular openings,”Prikl. Mekh.,9, No. 21, 98–107 (1973).
I. Ya. Amiro, A. S. Pal'chevskii, P. S. Polyakov, and A. A. Pryadko, “The stability of ribbed cylindrical shells under the mutual action of axial compression and torsion,”Prikl. Mekh.,13, No. 12, 51–57 (1977).
I. Ya. Amiro, A. S. Pal'chevskii, and A. A. Pryadko, “A technique for selection of the parameters of a ribbed cylindrical shell subject to axial compression,”Soprot. Mater. Teor. Sooruzh., No. 16, 138–140 (1972).
I. Ya. Amiro, A. S. Pal'chevskii, and A. A. Pryadko, “A technique for selection of the parameters of a ribbed cylindrical shell under axial compression,”Stroit. Mekh. Raschet. Sooruzh., No. 4, 28–31 (1972).
I. Ya. Amiro, A. S. Pal'chevskii, and A. A. Pryadko, “The influence of a preliminary bulging of a casing on the ultimate critical load of a ribbed cylindrical shell under axial compression,”Prikl. Mekh.,14, No. 7, 29–42 (1978).
I. Ya. Amiro, P. S. Polyakov, and V. G. Palamarchuk, “The stability of cylindrical shells of imperfect form,”Prikl. Mekh.,7, No. 8, 9–15 (1971).
I. Ya. Amiro and N. Ya. Prokopenko, “The influence of the disposition of layers and their mechanical characteristics on the stability of a two-layer cylindrical shell,”Prikl. Mekh.,6, No. 3, 9–15 (1970).
I. Ya. Amiro and N. Ya. Prokopenko, “The stability of a multilayer cylindrical shell under axial compression,”Soprot. Mater. Teor. Sooruzh., No. 13, 46–54 (1971).
I. Ya. Amiro and N. Ya. Prokopenko, “Stability analysis of a laminated cylindrical shell reinforced with longitudinal edges and subjected to axial compression,”Soprot. Mater. Teor. Sooruzh., No. 21, 3–11 (1973).
I. Ya. Amiro and N. Ya. Prokopenko, “Determination of critical dynamic stresses due to axial compression of laminated shells reinforced with ribs,”Prikl. Mekh.,19, No. 6, 47–51 (1983).
I. Ya. Amiro and N. Ya. Prokopenko, “Improvement of the critical loads for a ribbed cylindrical shell obtained by monomial approximations of displacements,”Prikl. Mekh.,23, No. 7, 20–26 (1987).
I. Ya. Amiro and N. Ya. Prokopenko, “The influence of the shape of the meridian and ring reinforcement on the critical pressure for shells of revolution,”Prikl. Mekh.,31, No. 1, 58–63 (1995).
I. Ya. Amiro and N. Ya. Prokopenko, “Determination of the critical external pressure in dynamic loading of shells of revolution,”Prikl. Mekh.,32, No. 4, 54–61 (1996).
I. Ya. Amiro and V. I. Étokov, “The stability of imperfect cylindrical shells under axial compression,”Prikl. Mekh.,12, No. 1, 32–37 (1976).
A. S. Vol'mir,Flexible Plates and Shells [in Russian],GIT, Moscow (1956).
G. D. Gavrilenko, “The stability of smooth and ribbed shells of revolution in an inhomogeneous stress-strain state (review),”Prikl. Mekh.,31, No. 7, 3–25 (1995).
G. D. Gavrilenko,The Stability of Ribbed Shells of Imperfect Form [in Russian], Inst. Mekh. im. S. P. Timoshenko NAN Ukrainy, Kiev (1999).
P. I. Galaka, V. A. Zarutskii, P. G. Kaplya, et al., “Studying the influence of axial compressive forces on the frequencies and vibration modes of ribbed cylindrical shells,”Prikl. Mekh.,11, No. 8, 41–48 (1975).
I. L. Gol'denveizer,The Theory of Elastic Thin Shells [in Russian], Gostekhizdat, Moscow (1963).
O. A. Grachev, “The influence of the eccentricity of ribs on the stability of spherical shells under external pressure,”Prikl. Mekh.,21, No. 1, 53–60 (1985).
O. A. Grachev and V. I. Ignatyuk, “Determination of the critical loads for shells of revolution with eccentric ribs with allowance for shear strains,”Prikl. Mekh.,22, No. 6, 36–43 (1986).
M. Y. Dlugach and G. D. Gavrilenko, “Stability analysis of ribbed cylindrical shells with large rectangular openings in a moment subcritical state,”Dop. Akad. Nauk URSR, Ser. A., No. 1, 33–37 (1977).
I. V. Zhemchuzhnikova, “The influence of the orthotropy and lamination of the casing of a ribbed shell of revolution on its stability,”Prikl. Mekh.,31, No. 2, 33–38 (1995).
V. A. Zarutskii, “The influence of the number and rigidity of ribs on the stability of ribbed cylindrical shells under axial compression,”Gidroaéromekh. Teor. Uprug. No. 13, 70–88 (1971).
V. A. Zarutskii, “Approximate formulas for stability analysis of ribbed cylindrical shells,”Prikl. Mekh.,31, No. 9, 51–57 (1995).
V. A. Zarutskii and V. I. Ignatyuk, “The impulse-load stability of orthotropic cylindrical shells preloaded with static loads,”Soprot. Mater. Raschet Sooruzh., No. 54, 16–19 (1989).
V. A. Zarutskii and V. I. Matsner, “The stability of a three-layer cylindrical shell reinforced with longitudinal ribs,” in:Design of Fiberglass Articles [in Russian], Naukova Dumka, Kiev 1972), pp. 175–184.
V. A. Zarutskii and V. I. Matsner, “Stability analysis of three-layer cylindrical shells with a ribbed filler,”Prikl. Mekh.,21, No. 6, 49–53 (1985).
V. A. Zarutskii and Yu. A. Sannikov, “The influence of the orthotropy parameters of the material on the stability of ribbed conic shells,”Mekh. Komp. Mater., No. 6, 1117–1119 (1985).
V. A. Zarutskii and Yu. V. Skosarenko, “The influence of lateral-shear strains on the stability of multilayer orthotropic ribbed cylindrical shells,”Prikl. Mekh.,30, No. 4, 91–96 (1994).
V. I. Ignatyuk, “Determination of the optimal reinforcement parameters of cylindrical shells under axial compression rapidly increasing in time,”Prikl. Mekh.,18, No. 10, 123–126 (1982).
V. V. Kabanov,The Stability of Inhomogeneous Cylindrical Shells [in Russian], Mashinostroenie, Moscow (1982).
S. N. Kan, K. E. Byrsan, O. A. Olifanova, et al.,Shell Stability, [in Russian], Khar'kovskii Univ., Khar'kov (1970).
A. V. Karmishin, V. A. Lyaskovets, V. I. Myachenkov, and N. N. Frolov,The Statics and Dynamics of Thin-Walled Shell Structures [in Russian], Mashinostroenie, Moscow (1982).
N. A. Kil'chevskii and S. N. Nikulinskaya, “An axisymmetric buckling mode of a circular cylindrical shell,”Prikl. Mekh.,1, No. 11, 1–6 (1965).
N. V. Koval'chuk, “The finite-element method in the stability analysis of ribbed cylindrical shells,”Prikl. Mekh.,12, No. 3, 28–29 (1976).
N. V. Koval'chuk, “Stability analysis of ribbed cylindrical shells with large openings,”Prikl. Mekh.,14, No. 10, 57–63 (1978).
N. V. Koval'chuk, “Studying the influence of reinforcement on the critical load for a cylindrical shell of constant weight with openings,”Prikl. Mekh.,20, No. 8, 50–54 (1984).
V. N. Kozhevnikov, “The value of the critical force due to axial compression of a cylindrical shell (in a linear formulation),”Izv. Akad. Nauk SSSR, Mekh. Mashinostr., No. 3, 137–141 (1964).
V. I. Matsner and P. S. Polyakov, “The stability of a cylindrical shell reinforced with longitudinal ribs and subject to axial compressive forces,”Probl. Prochn., No. 8, 22–26 (1971).
A. I. Manevich,The Stability and Optimal Design of Reinforced Shells [in Russian], Vyshcha Shk., Kiev-Donetsk (1979).
V. G. Palamarchuk, “The bulging of circular cylindrical shells under axial compression,” in:Trans. 7th All-Union Conf. on the Theory of Shells and Plates [in Russian], Nauka, Moscow (1970), pp. 460–464.
V. G. Palamarchuk and P. S. Polyakov, “The efficient reinforcement of a stringer shell with initial deflections,”Prikl. Mekh.,12, No. 3, 21–27 (1976).
A. S. Pal'chevskii, “Design of cylindrical stringer shells of minimum weight under axial compression,”Prikl. Mekh.,2, No. 9, 37–43 (1966).
A. S. Pal'chevskii, “Rigidity analysis of frames of longitudinally compressed ribbed cylindrical shells,”Prikl. Mekh.,4, No. 2, 67–71 (1968).
A. S. Pal'chevskii, “Cylindrical shells of minimum weight reinforced with stringers of a closed profile,”Prikl. Mekh. 5, No. 6, 107–112 (1969).
A. S. Pal'chevskii, “Design of stringer cylindrical shells of minimum weight under the mutual action of axial compression and internal pressure,”Prikl. Mekh.,6, No. 10, 49–54 (1970).
A. S. Pal'chevskii, “The stability of cylindrical shells reinforced with spiral ribs,”Prikl. Mekh.,26, No. 7, 49–56 (1990).
A. S. Pal'chevskii and V. G. Kirichenko, “The axial-compression stability a ribbed cylindrical shell preloaded with radial forces,”Prikl. Mekh.,30, No. 6 58–64 (1994).
A. S. Pal'chevskii and V. G. Kirichenko, “Prediction of the critical axial force of an imperfect cylindrical shell,”Prikl. Mekh.,31, No. 8, 48–53 (1995).
A. S. Pal'chevskii and A. I. Kukarina, “The stability of a ribbed cylindrical shell under boundary local loads,”Prikl. Mekh.,30, No. 1, 45–50 (1994).
A. S. Pal'chevskii and T. P. Omel'chenko, “The shear stability of a ribbed cylindrical shell,”Prikl. Mekh.,25, No. 4, 33–38 (1989).
A. S. Pal'chevskii and P. S. Polyakov, “The axial-compression stability of ribbed cylindrical shells with large openings bordered with rigid stringers and frames,”Soprot. Mater. Teor. Sooruzh., No. 31, 8–12 (1977).
A. S. Pal'chevskii and P. S. Polyakov, “The stress-strain state and stability of ribbed cylindrical shells with large openings subject to torsion and axial compression,”Prikl. Mekh.,14, No. 8, 57–63 (1978).
A. S. Pal'chevskii and A. A. Pryadko, “The stability of ribbed cylindrical shells under the mutual action of torsion, axial compression, and internal pressure,”Prikl. Mekh.,20, No. 5, 54–59 (1984).
A. S. Pal'chevskii and A. A. Pryadko, “The stability of ribbed cylindrical shells subject to pure bending and eccentric compression,”Prikl. Mekh.,24, No. 1, 25–30 (1988).
A. A. Pryadko, “Studying the supercritical strains of ribbed cylindrical shells subject to compression,”Prikl. Mekh.,5, No. 9, 34–39 (1969).
A. R. Savluk, “The stability of conic shells reinforced with meridional and nonregular ring stiffeners,”Prikl. Mekh.,31, No. 1, 73–78 (1995).
A. R. Savluk, “The stability of conic shells with meridional and nonregular ring stiffeners,”Prikl. Mekh.,26 No. 4, 56–61 (1990).
Yu. A. Sannikov, “The influence of the geometrical parameters of the casing on the stability of ribbed conic shells,”Prikl. Mekh.,22, No. 11, 54–58 (1986).
Yu. A. Sannikov, “The stability of ribbed conic shells under external pressure and axial contracting forces,”Prikl. Mekh.,22, No. 6, 44–48 (1986).
P. A. Sokolov, “The stability of a thin cylindrical shell reinforced with elastic circular ribs and subject to transversal and longitudinal loads,”Prikl. Mat. Mekh.,1, No. 2, 256–281 (1933).
S. P. Timoshenko,The Stability of Elastic Systems [in Russian], Gostekhizdat, Moscow-Leningrad (1946).
S. Yu. Fialko, “Studying the influence of the initial deflection on the natural frequencies of ribbed conic shells,”Prikl. Mekh.,18, No. 11, 118–122 (1982).
V. I. Étokov, “The influence of stiffeners on the stability of an imperfect cylindrical shell,”Prikl. Mekh.,13, No. 1, 54–60 (1977).
B. Almroth, “Postbuckling behavior of axially compressed circular cylinders,”AIAA J.,1, No. 3, 630–633 (1963).
I. Ya. Amiro and V. A. Zarulskii, “Taking the discrete rib spacing into account when studying the stressed-strained state, vibrations, and stability of ribbed shells (review),”Int. Appl. Mech.,34, No. 4, 299–314 (1998).
S. Yu. Flaiko, “Transcritical buckling of reinforced thin-walled prismatic folded systems,”Int. Appl. Mech.,34, No. 3, 277–281 (1998).
W. Flugge, “Die Stabilitat der Kreiszylinderschale,”Ing. Arch.,111, No. 5, 463–506 (1932).
E. A. Gotsulyak and D. E. Prusov, “Numerical study of the stability of geometrically imperfect shells of general form,”Int. Appl. Mech.,35, No. 6, 610–613 (1999).
G. J. Simitses and J. Giri, “Optimum weight design of stiffened cylinders subjected to torsion combined with axial compression with and without lateral pressure,”Comput. Struct.,8, No. 1, 19–30 (1978).
G. J. Simitses and V. Ungbhakorn, “Minimum weight design of stiffened cylinders under axial compression,”AIAA Pap., No. 101, 1–9 (1974).
J. Singer, J. Arbocz, and Ir. Babcock, “Buckling of imperfect stiffened cylindrical shells under axial compression,”AIAA J.,9, No. 1, 68–75 (1971).
Additional information
S.P. Timoshenko Institute of Mechanics, National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 36, No. 5, pp. 3–31, May, 2000.
Rights and permissions
About this article
Cite this article
Zarutskii, V.A. Features of the buckling of ribbed shells. Int Appl Mech 36, 559–585 (2000). https://doi.org/10.1007/BF02682073
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02682073