Abstract
The effect of air cooling of the plasma-fused face surface of wall ceramics on the physicomechanical and decorative properties of the glaze layer are studied. A technology for glaze powder spraying on the fused surface of wall ceramics using an air jet has been developed.
Similar content being viewed by others
References
M. N. Rykalin, P. A. Rebinder, and N. N. Dolgopolov, “Use of low-temperature plasma in the technology of construction materials,”Stroit. Mater., No. 11, 7–8 (1972).
I. A. Gerdvis, “Factory parameters of glazing building structures,” in:Tr. of NIIstroikeramika, Issue 38 [in Russian], Moscow (1973), pp. 112–115.
I. I. Nemets, V. P. Krokhin, and V. S. Bessmertnyi, “Plasma treatment of wall ceramics,”Steklo Keram., No. 6, 22–23 (1987).
N. G. Korsak, “Fire-jet method for decorating structural elements of buildings,”Stroit. Mater., No. 6, 17–18 (1975).
V. S. Bessmertnyi, “Plasma decorative treatment of clay brick,”Stroit. Mater., No. 10, 27 (1983).
A. S. Orlov, “Decorative finish of brick by fusion,”Stroit. Mater., No. 2, 15–17 (1993).
G. G. Volokitin, N. K. Skripnikova, G. I. Zhirnova, et al., “Low-sorption coatings on silicate articles,”Steklo Keram., No. 7, 21–22 (1992).
L. V. Kotlyarova, “Technology for producing decorative brick from low-melting clays,”VNIIÉSM, Issue 4, 5–7 (1977).
L. V. Kotlyarova and V. B. Ignatov, “Technology for producing decorative brick using the fusion method,”VNIIÉSM, Issue 2, 4–6 (1980).
L. V. Kotlyarova, “A study of decorative-brick production using the fusion method,” in:Engineering-Physics Studies of Construction Materials [in Russian], Chelyabinsk (1977), pp. 149–155.
L. V. Kotlyarova,Brick Decoration Using the Gas-Plasma Treatment Method. Author’s Abstract of Candidate’s Thesis [in Russian], Moscow (1980).
N. I. Lepnitskaya, V. B. Shimanovich, A. K. Shipai, et al., “On certain specifics of the technology for facing brick with a fused surface,” in:Intensification of Technological Processes in the Production of Construction Materials and Improvement of Their Quality [in Russian], Minsk (1979), pp. 104–108.
G. G. Smirnova, I. B. Ban’kovskaya, M. V. Sazonova, et al., “Gas-flame glazing of construction materials,”Stroit. Mater., No. 8, 18–20 (1976).
V. P. Krokhin, V. S. Bessmertnyi, V. A. Panasenko, et al., “Glazed wall ceramics using Kursk Magnetic Anomaly waste,”Steklo Keram., No. 7, 23–24 (1998).
V. P. Krokhin, V. S. Bessmertnyi, V. A. Panasenko, et al., “Decoration of glass and glass articles using the plasma-spraying method,”Steklo Keram., No. 3, 12–14 (1999).
V. A. Kostikov and Yu. A. Shesterin,Plasma Coatings [in Russian], Metallurgiya, Moscow (1978).
Author information
Authors and Affiliations
Additional information
Translated from Steklo i Keramika, No. 4, pp. 19–21, April, 2000.
Rights and permissions
About this article
Cite this article
Bessmertnyi, V.S., Panasenko, V.A., Glaz, V.N. et al. Glazing of wall ceramics using air cooling (a review). Glass Ceram 57, 127–129 (2000). https://doi.org/10.1007/BF02681526
Issue Date:
DOI: https://doi.org/10.1007/BF02681526