Abstract
An analysis of known barium crystals and barium-containing electrovacuum glasses is provided. The possibility and expediency of their use in the production of lighting sources is demonstrated. The properties of new environmentally safe clectrovacuum glass that can be produced using the known designs of glass-melting furnaces and molding methods are described.
Similar content being viewed by others
References
A. P. Sivko and A. I. Zyuzin, “Specifics of melting of high-lead glass in highly efficient furnaces,”Steklo Keram., No. 5, 26 – 28 (1988).
A. P. Sivko, V. V. Lityushkin, V. I. Uvarov etc., “Improvement of chemical composition and technology of melting of high-lead glass in a highly efficient furnace,”Steklo Keram., No. 8, 3 – 6 (1995).
B. Rous,Glass in Electronics [Russian translation], Sov. Radio, Moscow (1969).
P. M. Veklich, F. P. Oshchipkov, and V. K. Frolov,Technology of Vacuum Electric Glass [in Russian]. Gosenergoizdat, Moscow — Leningrad (1961).
Author information
Authors and Affiliations
Additional information
Translated from Steklo i Keramika, No. 6, pp. 9 – 10, June, 2000.
Rights and permissions
About this article
Cite this article
Lityushkin, V.V., Kovalenko, A.I., Sivko, A.P. et al. Barium-containing glass as an efficient substitute for high-lead glass in the production of light sources. Glass Ceram 57, 193–194 (2000). https://doi.org/10.1007/BF02681275
Issue Date:
DOI: https://doi.org/10.1007/BF02681275