References
A. Hasui, The Plasma-Spraying Technique [Russian translation], Mashinostroenie, Moscow (1975).
V. V. Kudinov, P. Yu. Pekshev, and V. E. Benashchenko, Coating with Plasma [in Russian], Nauka, Moscow (1990).
S. Kozerski, “Oxides contained in plasma-sprayed coatings type Ni−Cr and Ni−Al,” Powt. Ochz.,16, Nos. 5/6, 28–31 (1988).
D. S. Borisov, S. L. Fishman, and T. A. Nimvitskaya, “Plasma-sprayed heat-resistant coatings of composite powders,” in: Heat-Resistant and Thermostable Coatings, Nauka, Leningrad (1969), pp. 273–286.
N. A. Raspopov, “Formation of oxide film on particles of iron powder upon aerial atomization of iron-carbon alloys,” Poroshk. Metall., No. 9, 12–16 (1984).
I. E. Polishchuk and O. G. Yasinskaya, “Plasma-sprayed eutectic coatings with carbide-intermetallic strengthening,” Trenie i Iznos,13, No. 2 (1992).
G. Kh. Karapetyan, “Principles of designing antifriction powder materials,” Trenie i Iznos.,9, No. 6, 1032–1039 (1988).
S. I. Gubenko, “Structure of phase boundaries between nonmetallic inclusion and matrix in steel,” Metally, No. 6, 105–111 (1994).
S. I. Popel', A. A. Deryabin, and O. A. Esin, “Surface properties, of oxide systems of which the products of deoxidation of ball-bearing steel consist,” Izv. Vyssh. Uchebn. Zaved., Chern, Metall., No. 12, 5–9 (1963).
Additional information
Materials Science Institute, Ukrainian Academy of Sciences, Kiev. Translated from Poroshkovaya Metallurgiya, Nos. 9-10(397), pp. 38–43, September–October, 1997.
Rights and permissions
About this article
Cite this article
Ostranitsa, A.E., Nazarenko, P.V., Polishchuk, I.E. et al. The effect of alloying on the structural characteristics of the oxide phase in plasma-sprayed coatings. Powder Metall Met Ceram 36, 487–490 (1997). https://doi.org/10.1007/BF02680498
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02680498