Abstract
ATR prism was used firstly as the FIR laser output coupler. Such output mirror possesses good separation of the pump (λ≈10µm) and FIR radiation without losses. Transmittance of this mirror can be simply controlled by adjustment of gap between two output prisms. The dependence of mirror output characteristics on pump radiation polarization, prism refractive index, gap between prisms are under consideration.
Similar content being viewed by others
References
Yamanaka M., Rev.Laser Engng.,3, 253 (1976).
Jacobsson S., Infrared Phys.,29, 853 (1989).
Danielevich E.J., Plant T.K., and Detemple T.A., Opt. Commun.13, 366 (1975).
Belland P., Infrared Phys.24, 381 (1984).
Vaicikauskas V.. Infrared Phys. and Technol.36, 475 (1995).
Harrick N.J. Internal Reflection Spectroscopy. New York (1967).
Born M., and Wolf E., Principles of Optics. Pergamon, New York (1975).
Loewenstein E., Smith D.R., and Morgan R.L., Appl. Opt.12, 398 (1973).
Loewenstein E., Smith D.R., and Morgan R.L., Appl. Opt.14, 1335 (1975).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vaicikauskas, V., Antanavicius, R. & Januskevicius, R. Art output mirror for fir laser. Int J Infrared Milli Waves 18, 383–389 (1997). https://doi.org/10.1007/BF02677927
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02677927