References
A. A. Nechiporenko, A. G. Molyar, and O. Yu. Nechiporenko, “Modeling the oxidation of self-fluxing iron alloys in the vapor deposition and hard-facing of coatings”, Poroshk. Metall., Nos. 3–4, 77–82 (1997).
V. A. Antonov, I. A. Kondrat’ev, P. V. Gladkii, et al., “Hard-facing dies for cold forging with the use of cored wire PP-AN140”, Avtom. Svarka, No. 5, 48–52 (1989).
I. I. Frumin and V. G. Eremeev (eds.), Hard-Facing Materials Used in the Member-Nations of the CMEA (Council for Mutual Economic Aid).
Yu. N. Taran and V. I. Mazur, Structure of Eutectic Alloys, Metallurgiya, Moscow (1978).
V. P. Eremeev and Yu. V. Strelyannyi, “Selection, of an alloy for hard-facing the surfaces of seals in water turbines”, Avtom. Svarka, No. 5, 48–52 (1990).
Hard-Facing in the Production of Equipment and Machine Parts: Symposium. In-t Élektrosvarki AN Ukrainy, Kiev (1986)
I. S. Kulikova (ed.), Slag Atlas [in Russian], Metallurgiya, Moscow (1986).
A. A. Nechiporenko, A. N. Stepanchuk, T. G., Protsenko, et al., “High-temperature oxidation of self-fluxing iron alloys”, Adhesiya Rasplavov i Paika Materialov,28, 51–55 (1992).
A. A. Spiridonov, Experiment Planning in the Study of Production Processes [in Russian], Mashinostroenie, Moscow (1981).
D. F. Elliot, M. Glazer, and W. Ramarkrishna, Thermochemistry of Steelmaking Processes [Russian translation], Metallurgiya, Moscow (1969).
L. G. Voroshnin, F. I. Panteleenko, S. N. Lyubetskii, et al., “Treatment of metallic powders and the production of highly efficient wear-resistant hard facings”, Zashch. Pokrytiya Met., No. 28, 25–28 (1991).
Additional information
Antonov ANTK, Kiev. Translated from Poroshkovaya, Metallurgiya, Nos. 11–12, pp. 49–54, November–December, 1997.
Rights and permissions
About this article
Cite this article
Nechiporenko, A.A., Molyar, A.G. & Nechiporenko, O.Y. Modeling the oxidation of self-fluxing iron alloys during the vapor deposition and hard-facing of coatings. II. Effect of alloy composition and temperature on the composition of the oxide phase. Powder Metall Met Ceram 36, 609–613 (1997). https://doi.org/10.1007/BF02676148
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02676148