Abstract
It is shown that the method of continuous measurement of pressure at the combustion front using an axial-force gauge is applicable to gas-free pyrotechnic systems producing solid reaction products and characterized by low gas permeability of specimens in the initial state. Small inclusions of a high-energy material producing gas combustion products are placed in the specimens to check the reliability of the result. These inclusions are located near the inlet to the main line going to the pressure gauge. The results of experiments on Ti+C+20% TiC specimens containing inclusions of pyroxylin powder are given.
Similar content being viewed by others
References
V. A. Golubev, P. G. Berezhko, V. F. Proskudin, and A. S. Malyshev, “Possibility of continuous measurement of the pressure in the combustion front of pyrotechnic compositions producing solid reaction products,”Fiz. Goreniya Vzryva,27, No. 1, 67–70 (1991).
V. A. Golubev, P. G. Berezhko, V. F. Proskudin, et al., “Displacement of igniter and specimen materials in combustion of gas-free systems in a rigid shell,”Fiz. Goreniya Vzryva,27, No. 2, 93–97 (1991).
E. V. Levakov, S. A. Peleskov, and V. P. Sorokin, “A thermoelectrical method of recording oscillatory combustion,”Fiz. Goreniya Vzryva,17, No. 3, 18–22 (1981).
Additional information
Institute of Experimental Physics, Sarov 607190. Translated from Fizika Goreniya i Vzryva, Vol. 33, No. 2, pp. 76–80, March–April, 1997.
Rights and permissions
About this article
Cite this article
Proskudin, V.F., Golubev, V.A. & Berezhko, P.G. Pressure measurements at the combustion front of gas-free pyrotechnic mixtures with low gas permeability. Combust Explos Shock Waves 33, 189–192 (1997). https://doi.org/10.1007/BF02671914
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02671914