Cited References
P. Perrot and G. Reumont, “Authors' Reply to ‘An Alternative Description of Dross Formation when Galvanizing Silicon Steels in Zinc-Nickel Baths,’ ”J. Phase Equilibria, 16(3), 207 (1995).
N.-Y. Tang, “An Alternative Description of Dross Formation when Galvanizing Silicon Steels in Zinc-Nickel Baths,”J. Phase Equilibria, 16(2), 110–112 (1995).
N.-Y. Tang and G. R. Adams,Proc, The Physical Metallurgy of Zinc Coated Steel, TMS Annual Meeting in San Francisco, CA, A.R. Marder, Ed., TMS, 41–54 (1994).
N.-Y. Tang, G.R. Adams, and P.S. Kolisnyk,Proceedings, Galvatech' 95, ISS, 777-782(1995).
P. Perrot and G. Reumont,J. Phase Equilibria, 15(5), 479–482 (1994).
P. Perrot and G. Reumont, ZMetallkd., 83(11), 786–790 (1992).
R. Sokolowski,Proc. 15th Int. Conf. on Hot Dip Galvanising, J. Edwards, Ed., Zinc Development Association, London, GE1/1 (1988).
N.-Y. Tang,J. Phase Equilibria, 15(3), 237–238 (1994).
N.-Y. Tang, “Refined 450°C Isotherm of Zn-Fe-Al Phase Diagram,”Mater. Sci. Tech., 11, 870–873 (1995).
N. Qiang, PTC Project 641-027, Report No. 2, Cominco Ltd., Product Technology Centre (1995).
Z.W. Chen and J.B. See,IS1J Int., 33(2), 307–312 (1993).
D.G. Pettifor,J. Phys. C, Solid State Phys., 9, 285–313 (1986).
D.R. Gaskell,Introduction to Metallurgical Thermodynamics, 2nd ed., Hemisphere Publishing Corporation, 492 (1981).
J.H. Hildebrand,J. Am. Chem. Soc, 51, 66 (1929).
C.H.P. Lupis and J.F. Elliott,Acta Metall, 15, 265 (1967).
H.K. Hardy,Acta Metall., 1, 202 (1953).
M. Hillert and S. Jonsson,Metall. Trans. A, 23, 3141 (1992).
P. Perrot, J.C. Tissier, and J.Y. Dauphin,Z. Metallkd., 83, 11, 786–790 (1992).
S. Yamaguchi, H. Makino, A. Sakatoku, and Y Iguchi,Proceedings, Galvatech' 95, ISS, 787–794 (1995).
N. Qiang, PTC Project 641-020, File Note, Cominco Ltd., Product Technology Centre, Sept 14,1995.
Rights and permissions
About this article
Cite this article
Accurate description of liquid phase boundary — A reply to the reply by professors perrot and reumont. JPE 17, 89–91 (1996). https://doi.org/10.1007/BF02665781
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02665781