Abstract
The mechanisms which give rise to substructural strength originate in the dislocation character of the substructure boundary, in the size of sources for continued slip which the boundaries permit, and in the size of the cells or subgrains. The interrelation of these factors must be considered in obtaining a general view of the strengthening.
Similar content being viewed by others
References
For example, P. Gay, P. B. Hirsch, and A. Kelly:Acta Crystallogr., 1954, vol. 7, pp. 41–49.
R. D. Heidenreich:J. Appl. Phys., 1949, vol. 20, pp. 993–1010.
M. R. Staker and D. L. Holt:Acta Met., 1972, vol. 20, pp. 569–79.
F. R. N. Nabarro, Z. S. Basinski, and D. B. Holt:Advan. Phys., 1964, vol. 13, pp. 193–323.
H. M. Otte and J. H. Hren:Exper. Mech., 1966, vol. 6, pp. 177–86.
D. J. Michel, J. Moteff, and A. J. Lovell:Acta Met., 1973, vol. 21, pp. 1269–77.
J. D. Embury, A. S. Keh, and R. M. Fisher,Trans. TMS-AIME, 1966, vol. 236, pp. 1252–60.
J. D. Boyd and J. D. Embury:Electron Microscopy and Structure of Materials, G. Thomas, ed. pp. 470–82, University of California Press, Berkeley, Calif., 1972.
D. L. Holt:J. Appl. Phys., 1970, vol. 41, pp. 3197–201.
G. Langford and M. Cohen:Met. Trans. A, 1975, vol. 6A, pp. 901–10.
R. King and B. Chalmers:Progr. Metal Phys., 1949, vol. 1, pp. 127–62.
R. C. Gifkins:J. Aust. Inst. Metals., 1961, vol. 6, pp. 227–43.
G. Langford and M. Cohen:Trans. ASM, 1969, vol. 62, pp. 623–38.
R. J. McElroy and Z. C. Szkopiak:Int. Met. Rev., 1972, vol. 17, pp. 175–202.
A. Seeger, S. Mader, and H. Kronmüller,Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds. pp. 665–710, Interscience, New York, N.Y., 1963.
P. B. Hirsch,Relation Between Structure and Mechanical Properties of Metals, pp. 40–82, H.M.S.O., London, 1963.
J. T. Moore and D. Kuhlmann-Wilsdorf:J. Appl. Phys., 1970, vol. 41, pp. 4411–17.
J. T. Moore and D. Kuhlmann-Wilsdorf:J. Appl. Phys., 1971, vol. 42, pp. 953–61.
J. T. Moore and D. Kuhlmann-Wilsdorf:J. Appl. Phys., 1971, vol. 42, pp. 3717–25.
J. T. Moore and D. Kuhlmann-Wilsdorf:J. Appl. Phys., 1971, vol. 42, pp. 3726–30.
J. T. Moore and D. Kuhlmann-Wilsdorf:Surface Sci., 1972, vol. 31, pp. 456–76.
M. N. Bassim and D. Kuhlmann-Wilsdorf:Phys. Status Solidi (a) 1973, vol. 15, pp. 725–34.
M. N. Bassim and D. Kuhlmann-Wilsdorf:Phys. Status Solidi (a), 1973, vol. 16, pp. 241–51.
M. N. Bassim and D. Kuhlmann-Wilsdorf:Phys. Status Solidi (a), 1973, vol. 17, pp. 281–92.
M. N. Bassim and D. Kuhlmann-Wilsdorf:Phys. Status Solidi (a), 1973, vol. 17, pp. 379–93.
M. N. Bassim and D. Kuhlmann-Wilsdorf:Phys. Status Solidi (a), 1973, vol. 19, pp. 335–46.
D. Kuhlmann-Wilsdorf:Work Hardening in Tension and Fatigue, A. W Thompson, ed. AIME, New York, N.Y., in press.
J. T. McGrath and G. W. J. Waldron:Phil. Mag., 1964, vol. 9, pp. 249–59.
W. Roberts, S. Karlsson, and Y. Bergström:Mater. Sci. Eng., 1973, vol. 11, pp. 247–54.
W. Scoble and S. Weissmann:Cryst. Latt. Defects, 1973, vol. 4, pp. 123–36
D. J. Abson and J. J. Jonas:Metal Sci. J., 1970, vol. 4, pp. 24–28.
J. H. Cairns, J. Clough, M. A. P. Dewey, and J. Nutting,J. Inst. Metals, 1971, vol. 99, pp. 93–97.
O. Košík, D. J. Abson, and J. J. Jonas:J. Iron Steel Inst., 1971, vol. 209, pp. 624–29.
D. Kalish and B. G. LeFevre:Met. Trans. A, 1975, vol. 6A, pp. 1319–24.
H. J. Rack and M. Cohen,Frontiers in Materials Science, pp. 365–89, Dekker, New York, N.Y., 1976.
H. J. McQueen:Met. Trans. A, 1977, vol. 8A, pp. 807–24.
M. J. Witcomb:Phys. Status Solidi (a), 1974, vol. 22, pp. 299–304.
W. L. Bragg:Nature, 1942, vol. 149, p. 511.
U. F. Kocks:Met. Trans., 1970, vol. 1, pp. 1121–43.
A. W. Thompson and M. I. Baskes:Phil. Mag., 1973, vol. 28, pp. 301–08.
A. W. Thompson, M. I. Baskes, and W. F. Flanagan:Acta Met., 1973, vol. 21, pp. 1017–28.
A. W. Thompson:Acta Met., 1975, vol. 23, pp. 1337–42.
J. E. Pratt:Acta Met., 1967, vol. 15, pp. 319–27.
C. E. Feltner and C. Laird:Acta Met., 1967, vol. 15, pp. 1633–53.
C. E. Feltner:Acta Met., 1963, vol. 11, pp. 817–28.
R. L. Segall and P. G. Partridge:Phil. Mag., 1959, vol. 4, pp. 912–19.
H. J. McQueen:J. Metals., 1968, vol. 20, No. 4, pp. 31–38.
A. S. Keh and S. Weissmann:Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, ed., pp. 231–99, Interscience, New York, N.Y., 1963.
C. M. Young and O. D. Sherby:J. Iron Steel Inst., 1973, vol. 211, pp. 640–47.
D. Griffiths and J. N. Riley:Acta met., 1966, vol. 14, pp. 755–73.
H. J. Rack and M. Cohen:Mater. Sci. Eng., 1970, vol. 6, pp. 320–26.
R. W. Armstrong:Met. Trans., 1970, vol. 1, pp. 1169–76.
D. H. Warrington:J. Iron Steel Inst., 1963, vol. 201, pp. 610–13.
L. Anand and J. Gurland:Met. Trans. A, 1976, vol. 7A, pp. 191–97.
P. R. Swann,Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., pp. 131–79, Interscience, New York, N.Y., 1963.
D. Kuhlmann-Wilsdorf:Met. Trans., 1970, vol. 1, pp. 3173–79.
E. Orowan:Symposium on Internal Stresses in Metals and Alloys, pp. 451–64, Inst. Metals, London, 1948.
J. C. M. Li:Trans. TMS-AIME, 1963, vol. 227, pp. 239–47.
J. C. M. Li:Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., pp. 713–78, Interscience, New York, N.Y., 1963.
A. T. English and G. Y. Chin:Acta Met., 1965, vol. 13, pp. 1013–16.
H. J. McQueen, W. A. Wong, and J. J. Jonas:Can. J. Phys., 1967, vol. 45, pp. 1225–34.
G. Langford, P. K. Nagata, R. J. Sober, and W. C. Leslie:Met. Trans., 1972, vol. 3, pp. 1843–49.
J. L. Lytton, K. H. Westmacott, and L. C. Potter:Trans. TMS-AIME, 1965, vol. 233, pp. 1757–65.
C. J. Ball:J. Iron Steel Inst., 1959, vol. 191, pp. 232–36.
J. D. Baird:J. Iron Steel Inst., 1966, vol. 204, pp. 44–45.
M. J. Roberts and W. Jolley:Met. Trans., 1970, vol. 1, pp. 1389–98.
E. S. Meieran and D. A. Thomas:Trans. TMS-AIME, 1965, vol. 233, pp. 937–43.
J. W. Steeds:Proc. Roy. Soc. London, 1966, vol. A292, pp. 343–73.
J. D. Embury:Strengthening Methods in Crystals, A. Kelly and R. B. Nicholson, eds., pp. 331–402, Wiley, New York, N.Y., 1971.
F. Hultgren:Trans. TMS-AIME, 1964, vol. 230, pp. 898–903.
J. S. H. Lake and G. B. Craig:Met. Trans., 1971, vol. 2, pp. 1579–86.
J. C. M. Li and Y. T. Chou:Met. Trans., 1970, vol. 1, pp. 1145–59.
J. P. Hirth:Met. Trans., 1972, vol. 3, pp. 3047–67.
E. P. Abrahamson:Surfaces and Interfaces II, pp. 262–69, Syracuse University Press, Syracuse, N.Y., 1968.
B. A. Wilcox and A. H. Clauer:Acta Met., 1972, vol. 20, pp. 743–57.
R. L. Miller:Met. Trans., 1972, vol. 3, pp. 905–12.
W. B. Morrison and R. L. Miller:Ultrafine-Grain Metals, J. J. Burke and V. Weiss, eds, pp. 183–211, Syracuse University Press, Syracuse, N.Y., 1970.
A. W. Thompson:Acta Met., 1977, vol. 25, pp. 83–86.
A. L. Wingrove:J. Inst. Metals., 1972, vol. 100, pp. 313–14.
I. M. Bernstein and B. B. Rath:Met. Trans., 1973, vol. 4, pp. 1545–51.
W. F. Hosford:Trans. TMS-AIME, 1964, vol. 230, pp. 12–15.
G. Langford and M. Cohen:Proc. 2nd Int. Conf. on Strength of Metals and Alloys, vol. 2, pp. 475–76. ASM, Metals Park, Ohio, 1970.
W. G. Truckner and D. E. Mikkola:Met. Trans. A, 1977, vol. 8A, pp. 45–49.
Author information
Authors and Affiliations
Additional information
Anthony W. Thompson, formerly with the Science Center, Rockwell International, Thousand Oaks, CA
This paper is based on a presentation made at a symposium on “Mechanical-Thermal Processing and Dislocation Substructure Strengthening,” held at the Annual Meeting in Las Vegas, Nevada, on February 23, 1976, under the sponsorship of the TMS/IMD Heat Treating Committee.
Rights and permissions
About this article
Cite this article
Thompson, A.W. Substructure strengthening mechanisms. Metall Trans A 8, 833–842 (1977). https://doi.org/10.1007/BF02661564
Issue Date:
DOI: https://doi.org/10.1007/BF02661564