Abstract
The mechanical properties and the strain-aging response of two rapidly solidified commercial aluminum alloys, Al-Cr-Zr and Al-Fe-V-Si (FVS0812), have been investigated in tension between 300 and 700 K. A ductility trough is observed between 350 and 550 K. It is associated with a dip in the strain-rate sensitivity (SRS). These results are interpreted in terms of dynamic strain aging (DSA), and through a semiquantitative analysis, the migrating species are tentatively identified as being chromium in the Al-Cr-Zr alloy and iron in the Al-Fe-V-Si alloy.
Similar content being viewed by others
References
D.J. Skinner, M.S. Zedalis, and P. Gilman:Mater. Sci. Eng., 1989, vol. Al 19, pp. 81–86.
I.G. Palmer, M.P. Thomas, and G.J. Marshall:Dispersion Strengthened Aluminum Alloys, 1988 TMS Annual Meeting, Phoenix, AZ, Y.W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1989, pp. 217–41.
D.J. Skinner, R.L. Bye, D. Raybould, and A.M. Brown:Scripta Metall., 1986, vol. 20, pp. 867–72.
D.J. Skinner:Dispersion Strengthened Aluminum Alloys, 1988 TMS Annual Meeting, Phoenix, AZ, Y.W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1989, pp. 181–97.
D. Raybould: Allied-Signal, private communication, 1990.
D.A. Woodford:Trans. ASM, 1969, vol. 62, pp. 291–93.
U.F. Kocks, J.J. Jonas, and H. Mecking:Acta Metall., 1979, vol. 27, pp. 419–32.
U.F. Kocks: inProgress in Materials Science, Pergamon Press, Oxford, United Kingdom, 1981, vol. 19, pp. 185–241.
D.K. Matlock and G. Krauss: inFormability and Metallurgical Structure, A.K. Sachdevand and J.D. Embury, eds., TMS, Warrendale, PA, 1987, pp. 33–48.
J.E. King, C.P. You, and J.F. Knott:Acta Metall., 1981, vol. 29, pp. 1553–66.
A. van den Beukel:Phys. Status Solidi (a), 1975, vol. 30, pp. 197–206.
R.A. Mulford and U.F. Kocks:Acta Metall., 1979, vol. 27, pp. 1125–34.
A. van den Beukel and U.F. Kocks:Acta Metall., 1982, vol. 30, pp. 1027–34.
L.P. Kubin, K. Chihab, and Y. Estrin:Acta Metall., 1988, vol. 36, pp. 2707–18.
L.P. Kubin and Y. Estrin:Acta Metall. Mater., 1990, vol. 38, pp. 697–708.
J. Friedel:Dislocations, Pergamon Press, Oxford, United Kingdom, 1967, pp. 353 and 405.
L.F. Mondolfo:Aluminum Alloys, Structure and Properties, Butterworths, London, 1979, pp. 24–29.
G.M. Hood:Phil. Mag. A, 1970, vol. 21, pp. 305–28.
D.L. Becke, I. Gödény, I.A. Szabo, G. Eidélyi, and FJ. Kedves:Phil. Mag. A, 1987, vol. 55, pp. 425–43.
G. Neumann: inDiffusion in Metals and Alloys (DIMETA-82), Diffusion and Defect Monograph Series No. 7, F.J. Kedves and D.L. Beke, eds., Trans. Tech. Publications, Aedermannsdorf, Switzerland, 1983, pp. 3–18.
Y.S. Nechaev and M.H. Yewondwossen:J. Phys. F: Met. Phys., 1987, vol. 17, pp. 1081–92.
M. Niinomi, T. Kobayashi, and K. Ikeda:J. Mater. Sci. Lett., 1986, vol. 5, pp. 847–48.
J.C. Ehrström, E. Andrieu, and A. Hneau:Scripta Metall., 1989, vol. 23, pp. 1397–1400.
T. Ishikawa and R.B. McLellan:Acta Metall., 1986, vol. 6, pp. 1091–95.
S. Linderoth:Phil. Mag. Lett., 1988, vol. 57, pp. 229–34.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bouchaud, E., Kubin, L. & Octor, H. Ductility and dynamic strain aging in rapidly solidified aluminum alloys. Metall Trans A 22, 1021–1028 (1991). https://doi.org/10.1007/BF02661095
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02661095