References
F. H. Froes, D. Eylon, G. E. Eichelman, and H. M. Burte:Journal of Metals, 1980, vol. 32, no. 2, pp. 47–54.
Powder Metallurgy of Titanium Alloys, F. H. Froes and John E. Smugeresky, eds., TMS-AIME Publications, Warrendale, PA, 1980.
F. H. Froes and D. Eylon:Titanium Net Shape Technologies, F. H. Froes and D. Eylon, eds., TMS-AIME Publications, Warrendale, PA, 1984, pp. 1–20.
F. H. Froes and D. Eylon: “Powder Metallurgy of Titanium Alloys — A Review,”Titanium ’84, Science and Technology, G. Lutjering, U. Zwicker, and W. Bunk, eds., Deutsche Gesellschaft für Metallkunde (DGM), Oberursel, West Germany, 1985, in press.
P. R. Roberts and P. Loewenstein:Powder Metallurgy of Titanium Alloys, TMS-AIME Publications, Warrendale, PA, 1980, pp. 21–25.
E.J. Kosinski:Progress in Powder Metallurgy 1982, J. G. Bewley and S.W. McGee, eds., MPIF/APMI Publications, Princeton, NJ, 1983, vol. 38, pp. 491–502.
D. Eylon, P.R. Smith, S.W. Schwenker, and F.H. Froes: “Status of Titanium Powder Metallurgy,” ASTM STP 830 onIndustrial Applications of Titanium and Zirconium, R. T. Webster and C. S. Young, eds., ASTM Publications, Philadelphia, PA, 1984, pp. 48–65.
D. Eylon, F. H. Froes, and L. D. Parsons: “Titanium Powder Metallurgy Components for Advanced Aerospace Applications,”Proceedings of the AIAA83, 24th Structures, Structural Dynamics, and Materials Conference, Lake Tahoe, NV, May 1983, pp. 586–93.
S. W. Schwenker, A. W. Sommer, D. Eylon, and F. H. Froes:Metall. Trans. A, 1983, vol. 14A, pp. 1524–28.
D. Eylon, F. H. Froes, D. G. Heggie, P. A. Blenkinsop, and R. W. Gardiner:Metall. Trans. A, 1983, vol. 14A, pp. 2497–505.
P. R. Smith, D. Eylon, S. W. Schwenker, and F. H. Froes:Advanced Processing Methods for Titanium, D. F. Hasson and C. H. Hamilton, eds., TMS-AIME Publications, Warrendale, PA, 1982, pp. 61–77.
F.H. Froes, D. Eylon, G. Wirth, K-J. Grundhoff, and W. Smarsly:Metal Powder Report, 1983, vol. 38, no. 1, pp. 36–41.
S. W. Schwenker, D. Eylon, and F. H. Froes:Materials and Process Continuing Innovations, SAMPE, Covina, CA, 1983, vol. 28, pp. 436–47.
R. E. Peebles: “Titanium Powder Metallurgy Forgings,” U.S. Air Force Technical Report, AFML-TR-71-148, September 1971, pp. 58–81.
John Moll: Crucible Research Center, Pittsburgh, PA, private communication, 1985.
E.J. Dulis, V.K. Chandhok, F.H. Froes, and L. P. Clark: “Manufacturing Procedures for the Production of Large Titanium PM Shapes: Current Status,” Proceedings of the 10th National SAMPE Technical Conference, Kiamesha Lake, NY, October 1978, pp. 316–29.
G. Welsch, Y-T. Lee, P. C. Eloff, D. Eylon, and F. H. Froes:Metall. Trans. A, 1983, vol. 14A, pp. 761–69.
G. Welsch, W. Smarsly, and R. Borath:Powder Metallurgy International, November 1982, vol. 14, no. 4, pp. 190–94.
I. Weiss, D. Eylon, M.W. Toaz, and F.H. Froes: “Effect of Isothermal Forging on Microstructure and Fatigue Behavior of Blended Elemental Ti-6Al-4V Powder Compacts,”Metall. Trans. A, 1985, in press.
A. M. Hirt and J. S. Duerr: Technical Report No. 50378 on: “Research Study of Compacted Ti-6Al-4V Powder Material by In-situ Fracture Scanning Auger Microprobe and Vacuum Fusion Mass Spectrometry,” Structure Probe, Metuchen, NJ, March 1985.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Eylon, D., Schwenker, S.W. & Froes, F.H. Thermally induced porosity in Ti-6Al-4V prealloyed powder compacts. Metall Trans A 16, 1526–1531 (1985). https://doi.org/10.1007/BF02658686
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02658686