Abstract
The relationship between the average mean grain boundary curvature,H, and the mean linear grain intercept, λ, has been experimentally determined for aluminum. The ratioH/λ - 1 = 0.31 was found to remain constant throughout grain growth. This value yields a driving pressure for grain growth approximately three times smaller than that derived by conventional modeling and yields realistic results in models of particle- or pore-inhibited grain growth.
Similar content being viewed by others
References
R.T. DeHoff:Trans. AIME, 1967, vol. 239, pp. 617–21.
J.W. Cahn:Trans. AIME, 1967, vol. 239, pp. 610–16.
E.E. Underwood:Quantitative Stereology, Addison-Wesley Publishing Co., Reading, MA, 1970, p. 219.
C. Zener: private communication to C.S. Smith; also,Trans. AIME, 1948, vol. 175, pp. 47–48.
N.A. Haroun and D.W. Budworth:J. Mater. Sci., 1968, vol. 3, pp. 326–28.
B.R. Patterson: Ph.D. Dissertation, University of Florida, Gainesville, FL, 1978.
F.N. Rhines and B.R. Patterson:Metall. Trans. A, 1982, vol. 13A, pp. 985–93.
Y. Liu and B.R. Patterson: University of Alabama at Birmingham, Birmingham, AL, unpublished research, 1991.
B.R. Patterson, Y. Liu, and J.A. Griffin:Metall. Trans. A, 1990, vol. 21A, pp. 2137–39.
B.R. Patterson and Y. Liu:J. Am. Ceram. Soc., 1990, vol. 73, pp. 3703–05.
C.J. Tweed, N. Hansen, and B. Ralph:Metall. Trans. A, 1983, vol. 14A, pp. 2235–43.
P. Hellman and M. Hillert:Scand. J. Metall., 1975, vol. 4, pp. 211–19.
P.R. Rios:Acta Metall., 1987, vol. 35, pp. 2805–14.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Patterson, B.R., Liu, Y. Relationship between grain Boundary Curvature and Grain Size. Metall Trans A 23, 2481–2482 (1992). https://doi.org/10.1007/BF02658051
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02658051