Abstract
A mathematical model of the ironmaking blast furnace (BF) is presented. The model describes the steady-state operation of the furnace in one spatial dimension using real process data sampled at the steelworks. The measurement data are reconciled by an interface routine which yields boundary conditions obeying the conservation laws of atoms and energy. The simulation model, which provides a picture of the internal conditions of the BF, can be used to evaluate the current state of the process and to predict the effect of operating actions on the performance of the furnace.
Similar content being viewed by others
References
Blast Furnace Phenomena and Modeling, Iron and Steel Institute of Japan, 1st ed., Elsevier Applied Sciences, Essex, United Kingdom, 1987.
T. Shibuya:Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 755–63.
I. Muchi:Trans. Iron Steel Inst. Jpn., 1967, vol. 7, pp. 223–37.
J. Yagi and I. Muchi:Trans. Iron Steel Inst. Jpn., 1970, vol. 10, pp. 181–87.
J. Yagi and I. Muchi:Trans. Iron Steel Inst. Jpn., 1970, vol. 10, pp. 392–405.
J.D. Oakey: Ph.D. Thesis, Lehigh University, Bethlehem, PA, 1970.
C.M. Ufret and T.J. Williams: inHeat and Mass Transfer in Metallurgical Systems, D.B. Spalding and N.H. Afgan, eds., McGraw Hill, New York, NY, 1981, pp. 3–27.
M. Hatano and K. Kurita:Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 448–56.
J. Yagi, K. Takeda, and Y. Omori:Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 884–92.
M. Kuwabara, K. Isobe, K. Mio, K. Nakanishi, and I. Muchi:ISIJ-Aus Inst. Min. Metall. Joint Symp., Oct. 13–14, 1983, Tokyo, Japan.
C.J. Fielden and B.I. Wood:J. Iron Steel Inst., 1968, vol. 206, pp. 650–58.
M. Hatano and H. Yamaoka: inHeat and Mass Transfer in Metallurgical Systems, D.B. Spalding and N.H. Afgan, eds., McGraw-Hill, New York, NY, 1981, pp. 65–76.
M. Hatano, Y. Misaka, Y. Matoba, and K. Otsuka:Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 524–33.
M. Hatano, K. Kurita, H. Yamaoka, and T. Yokoi:Tetsu-to-Hagané, 1982, vol. 68, pp. 2369–76.
M. Hatano, K. Kurita, H. Yamaoka, and T. Yokoi:Tetsu-to-Hagané, 1982, vol. 68, pp. 2377–84.
H. Kubo, T. Nishiyama, G. Kyoguchi, M. Yasuno, S. Taguchi, and J. Kurihara:Proc. 3rd Process Technology Conf., Pittsburgh, PA, March 1982, AIME, New York, NY, pp. 39–48.
R. Wartmann, H. Mertes, A. Ceschinski, R. Röhrig, L. Sraeets, and G. Günther: Kommission der Europäischen Gemeinschaften, Bericht EUR 7583 DE, 1982.
H. Saxén, H. Uusi-Honko, and A. Kilpinen: inLecture Notes in Control and Information Sciences, Springer-Verlag, Berlin, 1988, vol. 113, pp. 395–405.
A. Kilpinen: inModeling, Identification and Control—MIC’88, IASTED Conference, H.M. Hamza, ed., Academic Press, Anaheim, CA, 1988, pp. 257–60.
T. Kootz and E. Wilms:Thyssenforschung, 1972, vol. 4, pp. 91–105.
Nobuo Tsuchiya, Masanori Tokuda, and Masayasu Ohtani:Metall. Trans. B, 1976, vol. 7B, pp. 315–20.
S. Taguchi, N. Tsuchiya, K. Okabe, H. Kubo, and K. Ichifuji:Proc. 3rd Process Technology Conf., Pittsburgh, PA, March 1982, AIME, New York, NY, 1982, pp. 25–38.
H. Weidenmüller, H. Hille, and K. Bellaire:Iron Steel Eng., April 1986, pp. 48–57.
H. Uusi-Honko, T. Westerlund, H. Saxén, R. von Schalien, and K. Fagervik:Proc. XVIII Congress of CEF, Naxos, Sicily, April 1987, pp. 103–07.
D.W. Marquardt:SIAM J. Appl. Math., 1963, vol. 11, pp. 431–41.
O. Kubaschewski, E.L.L. Evans, and C.B. Alcock:Metallurgical Thermochemistry, Pergamon Press, London, 1967.
I. Barin and O. Knacke:Thermochemical Properties of Inorganic Substances, Springer-Verlag, Berlin, 1973.
I. Barin, O. Knacke, and O. Kubaschewski:Thermochemical Properties of Inorganic Substances, Supplement, Springer-Verlag, Berlin, 1977.
H. Saxén: Ph.D. Thesis, Åbo Akademi, Åbo, Finland, 1988.
Y. Togino, M. Sugata, and K. Yamaguchi:Trans. Iron Steel Inst. Jpn., 1980, vol. 20, pp. 639–45.
T. Sugiyama:94,95th Nishiyama Memorial Technical Lecture, J. Iron Steel Inst., 1983, p. 193.
S. Taguchi, M. Nomura, S. Murakawa, N. Tsuchiya, K. Okumura, K. Ichifuji, and H. Kubo:ISIJ-Aus. Inst. Min. Metall. Joint Symp., Oct. 13–14, 1983, Tokyo, Japan.
G.A. Flierman and H. Oderkerk: Iron Steel Inst. meeting on mathematical process models inIron and Steelmaking, Amsterdam, The Netherlands, 1973, pp. 40–50.
H. Saxén and L. Karilainen:Proc. Artificial Intelligence Applications and Neural Networks, IASTED Symp., Zurich, Switzerland, June 1990, in press.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Saxén, H. Blast furnace on-line simulation model. Metall Trans B 21, 913–923 (1990). https://doi.org/10.1007/BF02657817
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02657817