Abstract
Organic printed circuit boards (PCBs) with Au/Ni plates on bond pads are widely used in chip-on-board (COB), ball grid array (BGA), and chip-scale packages. These packages are interconnected using thermosonic gold wire bonding. The wire bond yield relies on the bondability of the Ni/Au pads. Several metallization parameters, including elemental composition, thickness, hardness, roughness, and surface contamination, affect the success of the solid state joining process. In this study, various characterization and mechanical testing techniques are employed to evaluate these parameters for different metallization schemes with varying Ni and Au layer thicknesses. The pull force of Au wires is measured as a function of plasma treatment applied before wire bonding to clean the bond pads. Close correlations are established between metallization characteristics and wire bond quality.
Similar content being viewed by others
References
G.G. Harman,Wire Bonding in Microelectronics: Materials, Processes, Reliability and Yield, 2nd ed (New York: McGraw Hill, 1997).
L. Christie, L. Levine, and M. Eshelman,Semiconductor Int. (Des Plaines, IL: Semiconductor Int., 1998), pp. 311–318.
C. Dunn, R.W. Johnson, M. Bozack, C. Kromis, J. Harris, and M. Knadler,Electron. Pkg. Prod., 73 (Sept. 1997).
H.M. Ho, C.K. Yeo, S.L. Chan, N. Wong, C.C. Ng, C.S. Ramanujan, and K. Li,IEEE/CPMTEPTC 1998 190 (1998).
V. Sundararaman, W.E. Subido, and H.R. Test,50th IEEE ECTC, 416 (2000).
S. Prasad,Advanced Packaging, 82 (April 1998).
I. Hadar,11th European Microelectronics Conf. (1997), pp. 211–218.
C. Lee, I. Rashiah, C.T. Chong, and R. Gopalakrishnan,IEEE EPTC 1997, 201 (1997).
R.E. Johnson and R.H. Dettre,Surface and Colloid Sciences, Vol. 2, ed. E. Matijevic (New York, Wiley, 1969), pp. 85–153.
F.M. Fowkes,Advances in Chemistry Series, ed. R.F. Gould (Washington, D.C.: Amer. Chem. Soc., 1964), pp. 99–111.
S. Yi, J.K. Kim, C.Y. Yue, and J.H. Hsieh,J. Adhesion, 73, 1 (2000).
J.K. Kim, D.H. Kim, and P. Hwang,J. Mater. Sci. 35, 4185 (2000).
D.H. Kim, J.K. Kim, and P. Hwang,Thin Solid Films 360, 187 (2000).
R.D. Rust and D.A. Doane,IEEE Trans. CHMT 14, 573 (1991).
N. Onda, A. Dommann, H. Zimmermann, Ch. Luchinger, V. Jaecklin, D. Zanetti, E. Beck, and J. Ramm,Proc. SEMICON Singapore (Singapore: SEMICON, 1996), pp. 42–47.
F. Fazlin,Solid State Technol. 39, 117 (1996).
H. Gruebel,Electron. Pkg. Production, 85 (Sept. 1997).
R. Hagen, J. Ramm, T. Zeiler, and B. Goller,Reliable IEEE/CPMT EPTC, 41 (1997).
C. Lee, R. Gopalakrishina, K. Nyunt, A. Wong, R.C.E. Tan, and J.W.L. Ong,Microelectronics and Reliability 39, 97 (1999).
V.L. von Arnim, J. Fessmann, and L. Psotta,Surface Coating Technol. 119, 517 (1999).
H.K. Charles, B.M. Romenesko, G.D. Wanger, R.C. Benson, and O.M. Uy,Proc. 20th IRPS (Washington, D.C.: IEEE Reliability Soc., 1982), pp. 128–139.
J.K. Nesheim,Proc. Int. Symp. Microelectronic (ISHM) (Washington, D.C.: Int. Soc. for Hybrid Microhardness, 1984), pp. 70–78.
V. Koeninger, H.H. Uchida, and E. Fromm,IEEE Trans. CHMT, Part A 18, 835 (1995).
G.G. Harman,Proc. ISHM Symp. (Washington, D.C.: Int. Soc. for Hybrid Microhardness, 1989), pp. 38–49.
J. Cai, S.W.R. Lee, D. Lau, and E. Leuenberger,Proc: 3rd Int. Symp. Electron. Pkg. Technol. (ISEPT) (Beijing, China: Tsinghua Univ. Press, 1998), pp. 176–181.
G.E. McGuire, J.V. Jones, and H.J. Dowell,Thin Solid Films 45, 59 (1977).
A. Schneuwly, P. Groning, L. Schlapbach, and V.P. Jaecklin,J. Electron. Mater. 27, 990 (1998).
B. Bingle, C. Rice, and T. Vogel,Electron. Pkg. and Production 32, 60 (1992).
G.R. Mount,MRS Symp. Proc., Vol. 390, 245 (1995).
P.M. Hall and J.M. Morabito,Thin Solid Films 53, 175 (1978).
J.W. Dini and H.R. Johnson,Proc. ISHM Symp., 89 (1979).
G.J. Casey and D.W. Endicott,Plating and Surface Finishing 67, 39 (1980).
D. Hillman,Surface Mount Int. Proc. Technical Prog., Vol II (San Jose, CA: 1996), pp. 687–701.
H. Haji, T. Morita, K. Arita, H. Nakashima, and H. Yoshinaga,Mater. Trans. JIM 34, 960 (1993).
H. Ueno,Mater. Trans. JIM 33, 1046 (1992).
K.L. Johnson,Contact Mechanics (Oxford, U.K.: Cambridge University Press, 1985), pp. 224–231.
J. Hirota,35th IEEE ECTC, 116 (1985).
T. Kawanobe, K. Miyamoto, M. Seino, S. Shoji, and O. Yoshioka,IEEE 35th ECTC (New York: IEEE, 1985), pp. 314–318.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kim, JK., Au, B.P.L. Effects of metallization characteristics on gold wire bondability of organic printed circuit boards. J. Electron. Mater. 30, 1001–1011 (2001). https://doi.org/10.1007/BF02657725
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02657725