Abstract
Experimental studies of flows generated in a 0.30 scale water model of a 150 ton steelmaking ladle are reported. These were used to test the adequacy of a generalized two-dimensional computational scheme for predicting flows generated by fully submerged and partially submerged gas injection lances. The roles of turbulence models and grid configuration were assessed. Predictions for flow fields generated in a 150 ton steelworks ladle with and without tapered side walls, and with and without surface baffles around the rising plume were considered.
Similar content being viewed by others
References
Y. Sahai and R. I. L. Guthrie:Metall. Trans. B. 1982. vol. 13B. pp. 203–11.
T. DebRoy. A. K. Majumdar. and D. B. Spalding:Appl. Math. Modelling. 1978. vol. 2. pp. 146–50.
J. Szekely. N. E. El-Kaddah. and J. H. Grevet: Second International Conference on Injection Metallurgy ’SCANINJECT IT. Part I. Jernkontoret. Sweden. 1980. pp. 5:1-32.
C. Aldham. N. C. Markatos. and M. Cross: International Conference on Process Modelling ’POLYMODEL 5’. Cleveland. U.K.. 1982.
A.D. Gosman. W. M. Pun. A. K. Runchal. D. B. Spalding. and M. Wolfshtein:Heal and Mass Transfer in Recirculating Flows. Aca- demic Press. London and New York. 1969. pp. 18–112.
B. E. Launder and D. B. Spalding:Computer Methods in Mechanics and Engg.1974.vol.3 PP- 269–89.
Y. Sahai and R.I.L. Guthrie:Metall. Trans. B. 1982. vol. 13B. pp. 193–202.
Y. Sahai and R.I.L. Guthrie:Metall. Trans. B. 1982. vol. 13B. pp. 125–27.
S. V. Patankar and D. B. Spalding:Int. J. of Heat and Mass Transfer. 1972. vol. 15. pp. 1787–805.
D.B. Spaldinu:Heat Transfer and Turbulent Buoyant Convection. D.B. Spalding and N. Afgan. eds.. Hemisphere Publishing Cor- poration. NewYork. NY. 1977. pp. 569–86.
H.E. Kobus:Coast. Eng. Conference. London. 1968. vol. II, pp. 1016–31.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mazumdar, D., Guthrie, R.I.L. Hydrodynamic modeling of some gas injection procedures in ladle metallurgy operations. Metall Trans B 16, 83–90 (1985). https://doi.org/10.1007/BF02657492
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02657492