References
R. A. Foxall, M. S. Duesbery, and P. B. Hirsch:Can. J. Phys., 1967, vol. 45, p. 607.
D. K. Bowen, J. W. Christian, and G. Taylor:Can. J. Phys., 1967, vol. 45, p. 903.
F. Guiu:Scr. Met., 1969, vol. 3, p. 449.
H. D. Nine:J. Appl. Phys., 1973, vol. 44, p. 4875.
B. Etemad and F. Guiu:Scr. Met., 1974, vol. 8, p. 931.
P. J. Sherwood, E Guiu, H. C. Kim, and P. L. Pratt:Can. J. Phys., 1967, vol, 45, p. 1975.
R. Neumann:Z. Metallk, 1975, vol. 66, p. 26.
H. Mughrabi and Ch. Wuthrich:Phil. Mag., in press.
D. A. Koss and J. C. Chestnut:inTi Science and Technology, p. 1097, Plenum Press, New York, 1973.
J. Carlson and D. A. Koss, Michigan Technological University:Unpublished research, 1975.
G. Theodorski and D. A. Koss:To be published in Third Int. Conf. on Ti, Moscow, May, 1976.
R. Landgraf, J. Morrow, and T. Endo:J. Mater., 1969, vol. 4, p. 176.
J. W. Christian:inSecond Int. Conf. on Strength of Metals and Alloys, p. 29, ASM, Metals Park, 1970.
V. Vitek and J. W. Christian:Proc. of the Third Int. Conf. on the Strength of Metals and Alloys, p. 534, Inst. of Metals and the Iron and Steel Inst., London, 1973.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Koss, D.A., Wojcik, C.C. Flow stress asymmetry and cyclic stress-strain response in a BCC Ti-V alloy. Metall Trans A 7, 1243–1244 (1976). https://doi.org/10.1007/BF02656613
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02656613