Abstract
Central concepts in the theory of swelling based on defect reactions are reviewed. The critical radius and critical number of gas atoms, which determine the initiation of swelling, and the ratio of the dislocation and cavity sink strengths, which dictates the swelling rate, are demonstrated to be of great utility in the understanding and control of swelling. Over the past two decades, a large data base has been accumulated covering austenitic and ferritic/martensitic alloys, the leading candidate materials for both fusion and fast fission reactor applications. This collection of data naturally serves as the largest source of information on which to develop and test mechanistic understanding of swelling. Over wide ranges in materials and irradiation parameters, including composition, temperature, damage rate, and helium generation rate, we find that apparently divergent swelling behaviors can be explained in a unified manner within the present theoretical framework. Principles for microstructures that insure swelling resistance, together with results from the necessary confirmatory experiments, are described.
Similar content being viewed by others
References
A.D. Brailsford and R. Bullough:J. Nucl. Mater., 1972, vol. 44, pp. 121–35.
L.K. Mansur:Kinetics of Nonhomogeneous Process, Gordon R. Freeman, ed., John Wiley & Sons, Inc., New York, NY, 1987, pp. 377–463.
L.K. Mansur, K. Farrell, and J.O. Stiegler:Trans. Am. Nucl. Soc., 1975 Annual Meeting, New Orleans, LA, 1975, vol. 21, pp. 163–64.
L.K. Mansur, E.H. Lee, P.J. Maziasz, and A.F. Rowcliffe:J. Nucl. Mater., 1986, vol. 141–143, pp. 633–46.
L.K. Mansur:Nucl. Technol., 1978, vol. 40, pp. 5–35.
L.L. Horton and L.K. Mansur:Effects of Radiation on Materials, 12th Int. Symp., F.A. Garner and J.S. Perrin, eds., ASTM STP 870, ASTM, Philadelphia, PA, 1985, pp. 344–62.
V.F. Sears:J. Nucl. Mater., 1971, vol. 39, p. 18.
G.R. Odette and R.E. StollenJ. Nucl. Mater., 1984, vol. 122–123, pp. 514–19.
M.R. Hayns, M.H. Wood, and R. Bullough:J. Nucl. Mater., 1978, vol. 75, pp. 241–50.
J.R. Townsend:J. Nucl. Mater., 1982, vol. 108–109, pp. 544–49.
R.E. Stoller and G.R. Odette:Effects of Radiation on Materials, 11th Conf., H.R. Brager and J.S. Perrin, eds., ASTM STP 782, ASTM, Philadelphia, PA, 1982, pp. 275–94.
K.C. Russell:Acta Metall., 1971, vol. 19, p. 753.
J. Katz and H. Widersich:J. Chem. Phys., 1971, vol. 55, p. 1414.
L.K. Mansur and W.A. Coghlan:J. Nucl. Mater., 1983, vol. 199, pp. 1–25.
R.E. Stoller and G.R. Odette:Radiation-Induced Changes in Microstructure, 13th Int. Symp. (Part I), F.A. Garner, N.H. Packan, and A.S. Kumar, eds., ASTM STP 955, ASTM, Philadelphia, PA, 1987, pp. 371-92.
H.T. Wollenberger: inPhysical Metallurgy, R.W. Cahn and P. Haasen, eds., Elsevier Science Publishers, New York, NY, 1983, ch. 17.
R. Bullough, M.H. Wood, and E.A. Little:Effects of Radiation on Materials, 10th Conf., David Kramer, H.R. Brager, and J.S. Perrin, eds., ASTM STP 725, ASTM, Philadelphia, PA, 1981, pp. 593–609.
D.S. Gelles:J. Nucl. Mater., 1982, vol. 108–109, pp. 515–26.
W.A. Coghlan and L.K. Mansur:J. Nucl. Mater., 1984, vol. 122–123, pp. 495–501.
P.J. Maziasz:J. Nucl. Mater., 1984, vol. 122–123, pp. 427–86.
M. Itoch, S. Onose, and S. Yuhara:Radiation-Induced Changes in Microstructure, 13th Symp. (Part I), F.A. Gamer, N.H. Packan, and A.S. Kumar, eds., ASTM STP 955, ASTM, Philadelphia, PA, 1987, pp. 114–25.
E.H. Lee and N.H. Packan:Effects of Radiation on Materials, 14th Int. Symp., Andover, MA, 1988, ASTM STP 1046.
M.B. Lewis and K. Farrell:Nucl. Instrum. Methods Phys. Res., 1986, vol. B16, pp. 163–70.
T.A. Gabriel, B.L. Bishop, and F.W. Wiffen:Nucl. Technol., 1978, vol. 38, pp. 427–33.
E.H. Lee and L.K. Mansur:Phil. Mag., in press.
S.J. Zinkle and E.H. Lee:Metall. Trans. A, 1990, vol. 21A, pp. 1037–51.
A.D. Brailsford and L.K. Mansur:J. Nucl. Mater., 1981, vol. 103–104, pp. 1403–08.
E.H. Lee and L.K. Mansur:J. Nucl. Mater., 1986, vol. 141–143, pp. 695–702.
L.K. Mansur:Phil. Mag. A, 1981, vol. 44 (4), p. 867.
E.H. Lee, A.F. Rowcliffe, and L.K. Mansur:J. Nucl. Mater., 1981, vol. 103–104, pp. 1475–80.
E.H. Lee and L.K. Mansur:Phil. Mag. A, 1985, vol. 52 (4), pp. 493–508.
W.G. Johnston, T. Lauritzen, J.H. Rosolowski, and A.M. Turkalo:Properties of Reactor Structural Alloys after Neutron or Particle Irradiation, ASTM STP 570, ASTM, Philadelphia, PA, 1975, pp. 525–42.
W.K. Appleby, D.W. Sandusky, and U.E. Wolff:Radiation-Induced Voids in Metals, Proc. Int. Conf., Albany, NY, June 1971, J.W. Corbett and L.C. Ianniello, eds., AEC 26 Symp. Ser., USAEC Technical Information Center, Oak Ridge, TN, Apr. 1972, pp. 156–73.
N.H. Packan and K. Farrell:J. Nucl. Mater., 1979, vol. 85–86, pp. 677–81.
P.J. Maziasz:J. Nucl. Mater., 1982, vol. 108–109, pp. 359–84.
P.J. Maziasz:Effects of Helium Content on Microstructural Development in Type 316 SS under Neutron Irradiation, ORNL-6121, Nov. 1985, p. 132.
J.A. Sprague, J.E. Westmoreland, F.A. Smidt, Jr., and P.R. Malmberg:Properties of Reactor Structural Alloys after Neutron or Particle Irradiation, ASTM STP 570, ASTM, Philadelphia, PA, 1975, pp. 505–24.
J.E. Westmoreland, P.R. Malmberg, J.A. Sprague, and F.A. Smidt, Jr.:Radiat. Eff., 1975, vol. 26, p. 1.
F.A. Smidt, J.R. Reed, and J.A. Sprague:Radiation Effects in Breeder Reactor Structural Materials, Int. Conf., Scottsdale, AZ, June 1977, M.L. Bleiberg and J.W. Bennett, eds., AIME, New York, NY, 1977, pp. 337–46.
P.J. Maziasz:Effects of Helium Content on Microstructural Development in Type 316 SS under Neutron Irradiation, ORNL-6121, Nov. 1985, p. 109.
M.P. Tanaka, S. Hamada, A. Hishinuma, and P.J. Maziasz:J. Nucl. Mater., 1988, vol. 155–157, pp. 801–05.
S. Hamada, P.J. Maziasz, M.P. Tanaka, M. Suzuki, and A. Hishinuma:J. Nucl. Mater., 1988, vol. 155–157, pp. 838–44.
E.H. Lee and L.K. Mansur: Oak Ridge National Laboratory, Oak Ridge, TN, unpublished research, 1989.
D.S. Gelles:Radiation-Induced Changes in Microstructure, 13th Int. Symp. (Part I), F.A. Garner, N.H. Packan, and A.S. Kumar, eds., ASTM STP 995, ASTM, Philadelphia, PA, 1987, pp. 560–87.
F.A. Smidt, Jr., P.R. Malmberg, J.A. Sprague, and J.E. Westmoreland:Irradiation Effects on the Microstructure and Properties of Metals, ASTM STP 611, ASTM, Philadelphia, PA, 1976, pp. 227–41.
E.A. Little and D.A. Stow:Mater. Sci., Mar. 1980, pp. 89-94.
J.M. Vitek and R.L. Klueh:J. Nucl. Mater., 1984, vol. 122–123, pp. 245–59.
J.M. Vitek and R.L. Klueh:Proc. Topical Conf. on Ferritic Alloys for Use in Nuclear Energy Technologies, Snowbird, UT, 1983, TMS, Warrendale, PA, 1984, pp. 551–58.
K. Farrell and E.H. Lee:Effects of Radiation on Materials, 12th Int. Symp., F.A. Garner and J.S. Perrin, eds., ASTM STP 870, ASTM, Philadelphia, PA, 1985, pp. 383–93.
P.J. Maziasz and R.L. Klueh:Metall. Trans. A, in press.
Author information
Authors and Affiliations
Additional information
This paper is based on a presentation made in the symposium “Irradiation-Enhanced Materials Science and Engineering” presented as part of the ASM INTERNATIONAL 75th Anniversary celebration at the 1988 World Materials Congress in Chicago, IL, September 25–29, 1988, under the auspices of the Nuclear Materials Committee of TMS-AIME and ASM-MSD.
Rights and permissions
About this article
Cite this article
Lee, E.H., Mansur, L.K. Unified theoretical analysis of experimental swelling data for irradiated austenitic and ferritic/martensitic alloys. Metall Trans A 21, 1021–1035 (1990). https://doi.org/10.1007/BF02656524
Issue Date:
DOI: https://doi.org/10.1007/BF02656524