References
D. Santander:The Future of Copper Pyrometallurgy, C. Diaz, ed., Chilean Institute of Mining Engineers, 1974, pp. 31-89.
C. Diaz:Thermodynamic Properties of Copper-Slag Systems, INCRA Series, vol. III, 1974.
J. F. Elliott, M. Gleiser, and V. Ramakrishna:Thermochemistry for Steel- making, vols. I and II, Addison-Wesley Pub. Co., Inc., Reading, Mass., 1960, 1963.
D. R. Stull,et al:JANAF Thermochemical Tables, Dow Chemical Co., Midland, Mich., Loose-leaf edition. Also Second Edition NSRDS-NBS37.19, National Bureau of Standards.
R. Hultgren, P. D. Desai, D. T. Hawkins, M. Gleiser, K. K. Kelley, and D. S. Wagman:Selected Values of the Thermodynamic Properties of the Elements, and of Binary Alloys, ASM, Metals Park, Ohio, 1973.
A. Muan and E. F. Osborn:Phase Equilibria Among Oxides in Steelmaking, Am. Iron and Steel Inst., Addison-Wesley Pub. Co., Inc., Reading, Mass., 1965.
M. Hansen, K. Anderko, R. B. Elliott, and F. A. Shunk:Constitution of Binary Alloys, 2nd ed., First Suppl., Sec. Suppl., McGraw-Hill Book Co., N.Y., 1958, 1965, 1969.
U. Kuxmann and K. Kurre:Z. Ertzmetall., 1968, vol. 21, pp. 199–209.
R. E. Slade and F. D. Farrow:Proc. Roy. Soc., (London), 1912, vol. A87, pp. 524–34.
R. Vogel and W. Pocher:Z. Metallk., 1929, vol. 21, pp. 333–37.
J. Gerlach, J. Osterwald, and W. Stichel:Z. Metallk., 1968, vol. 59, pp. 576–79.
R. Schuhmann, Jr. and O. W. Moles:Trans. A1ME, 1951, vol. 191, pp. 235–41.
H. H. Kellogg:Can. Met. Quart., 1969, vol. 8, pp. 3–23.
H. F. Ramsdadt, F. D. Richardson, and P. J. Bowles:Trans. TMS-AIME, 1961, vol. 221, p. 1021.
M. F. Ancey-Moret, M. Olette, and F. D. Richardson:Mem. Sci., Rev. Met., 1964, vol. 61, p. 169.
A. Luraschi and J. F. Elliott: “Phase Relationships in the Cu-Fe-O-SiO2 Sys- tem, 1100 to 1350°C”,Proceedings, Copper Symposium, TMS-AIME, J. Agarwal and J. Yannopoulis, eds., 1976, in press.
A. M. M. Gadalla and J. White:Trans., Brit. Ceram. Soc., 1966, vol. 65, pp. 1–17.
N. L. Bowen and J. F. Schairer:Amer. J. Sci., 1932, 5th Series, vol. 24, no. 141, pp. 177–213.
O. Releaux:Metall. Erz., 1927, vol. 24, pp. 99–111.
H. Schlegel and A. Schüller:Z. Metallk., 1952, vol. 43, pp. 421–28.
W. A. Krivsky and R. Schuhmann:Trans. TMS-AIME, 1957, vol. 209, pp. 981–88.
T. Rosenqvist:J. Iron Steel Inst., 1954, vol. 176, pp. 37–57.
A. Yazawa and K. Sehnalek:Freiberger Forschungshefte, 1968, B vol. 128, pp. 7–18.
D. C. Hilty and W. Crafts:Trans. AIME, 1952, vol. 194, pp. 1307–12.
E. T. Turkdogan and G. J. Kor: with Appendix by L. S. Darken and R. W. Gurry:Met. Trans., 1971, vol. 2, pp. 1561–70.
M. Stofko, J. Schmiedl, and T. Rosenqvist:Scand. J. Met., 1974, vol. 3, pp. 113–18.
T. Rosenqvist and T. Hartvig: Part II,Meddelelse Nr. 12 fra Metallurgisk Komite’, Trondheim, Norway, 1958.
S. Bog and T. Rosenqvist: Part I,
M. Nagamori and M. Kameda:Trans. Inst. Metals, (Jap.), 1965, vol. 6, pp. 21–30.
W. Oelsen:Z. Giesseri, Techn. Wiss. Beihefte, 1952, pp. 383-87.
W. Reinders and F. Gourdian:Z. Anorg. Allg. Chem., 1923, vol. 126, pp. 215–21.
U. Kuxmann and T. Benecke:Z. Ertzmetall, 1966, vol. 19, pp. 215–21.
J. Schmiedl, M. Stofko, and V. Repcak:Neue Huette, 1971, vol. 16, pp. 390–94.
A. Yazawa and T. Azakami:, 1969, vol. 8, pp. 257–61.
E. W. Dewing and F. D. Richardson:Trans., Faraday Soc., 1958, vol. 54, p. 679.
A. Yazawa and M. Kameda:Technol. Rep. Tohoku Univ., 1953, vol. 19, no. 1, pp. 40–58.
R. W. Ruddle and B. Taylor: Br. Non-Ferrous Met. Research Assoc., Research Rept. No. A1603, Nov. 1954.
R. W. Ruddle, B. Taylor, and A. P. Bates:Trans. Inst. Mining Met. (section C), 1966, vol. 75, pp. c1–12.
R. Altman and H. H. Kellogg:, 1972, vol. 81, pp. C163–75.
J. M. Toguri and N. H. Santander:Can. Met. Quart., 1969, vol. 8, pp. 167–71.
M. Kameda and A. Yazawa:Phy. Chem. of Proc. Met., part 2, G. St. Pierre, ed., pp. 963–88, TMS Conf. Proc. Interscience, N.Y., 1961.
M. Kameda and A. Yazawa: Studies in Met., pp. 159-66, Commemoration for Prof. Matoba, Tôhoku Univ., 1970.
A. Yazawa and M. Kameda:Technol. Rep. Tohoku Univ., 1955, vol. 19, pp. 239–49.
W. H. MacLean:Econ. Geol., 1969, vol. 64, pp. 865–84.
A. Luraschi: Ph.D. Thesis, Department of Materials Science and Engineering, M.I.T., 1975.
A. Yazawa:Technol. Rep., Tohoku Univ., 1956, vol. 21, no. 1, pp. 31–50.
A. Geveci and T. Rosenqvist:Trans. Inst. Mining Met., 1973, vol. 82, pp. C193–202.
E. B. Johannsen, T. Rosenqvist, and P. T. Torgersen:J. Metals, 1970, vol. 22, no. 9, pp. 39–47.
A. Yazawa and M. Kameda:Technol. Rep., Tohoku Univ., 1954, vol. 19, pp. 1–22.
U. Kuxmann and F. Y. Bor:Z. Erzmetall, 1965, vol. 13, pp. 441–50.
N. Korakas:Trans. Inst. Mining Met., 1962, vol. 72, pp. 35–53.
J. H. E. Jeffes and C. Diaz:, 1966, vol. 19, pp. C1–6.
M. Nagamori:Met. Trans., 1974, vol. 5, pp. 531–38.
J. B. W. Bailey, N. E. Brown, F. A. Garner, and S. G. Ward:Advances in Ex- tractive Metallurgy and Refining, M. J. Jones, ed., pp. 81–94, I.M.M., London, 1972.
N. E. Brown and F. A. Garner: paper presented at C.I.M. Conf. of Met., Halifax, N.S., August 1972.
A. Yazawa:The Future of Copper Pyrometallurgy, C. Diaz, ed., pp. 91-105, Chilean Inst. of Min. Eng., 1974.
Rights and permissions
About this article
Cite this article
Elliott, J.F. Phase relationships in the pyrometallurgy of copper. Metall Trans B 7, 17–33 (1976). https://doi.org/10.1007/BF02652816
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02652816