Abstract
Research of carburized high-carbon bearing LH15 (52100) steel is presented. Problems analyzed include thermodynamic and kinetic basis of carburizing in two-phase field (austenite-cementite), carbon content influence in diffusive layer on utilization properties of the examined steel, and functional carbon content influence on chemical and phase composition of carbonized layer. An understanding of these problems enables modeling of functional properties and chemical and phase composition diffusion layers, obtained at definite carburizing parameters. That is the choice of carburizing process parameters (temperature, time, carbon potential) for the best utilizable properties.
Similar content being viewed by others
References
M. Przylecka, dissertation No. 202 (ISBN 0551-6528), Poznan University of Technology, 1988
.G. Krauss,Heat Treatment and Processing Principles, ASM International, 1990
Z. Przylecki, M. Przylecka, M. Kulka, T. Zemcik, J. Suwalski, Z. Kucharski, and M. Lukasiak,Trait. Thermique, Vol 264, 1993, p 37–41
M. Kulka, M. Przylecka, and W. Gestwa,Proceedings of the Second ASM Heat Treating and Surface Eng. Conference, ASM International, 1993, p 87-92
M. Kulka, M. Przylecka, W. Gestwa, and W. Budziński,Proceedings of 9th International Conference, (Nice, France), PYC Edition, 1994, p 283-290
M. Kulka, Ph.D. thesis, Poznań University of Technology, 1993
J. Lesage, D. Chicot, M. Przylecka, M. Kulka, and W. Gestwa,Trait. Thermique, Vol 276, 1994, p 42–46
T. Wada, H. Wada, J.F. Elliott, and J. Chipman,Metall. Trans., Vol 3, 1972, p 1657–1662
T. Wada, H. Wada, J.F. Elliott, and J. Chipman,Metall. Trans., Vol 3, 1972, p 2865–2872
K. Bungardt, H. Preisendanz, and G. Lehnert,Arch. Eisenhüttenwes., Vol 35, 1964, p 999–1007
H. Brandis, H. Preisendanz, and P. Schüler,Thyssen Edelstahl Tech. Ben, Vol 6, 1980, p 155–167
K.-H. Sauer, M. Lucas, and H.J. Grabke,Hart.-Tech. Mitt., Vol 43, 1988, p 45–53
F. Neumann and B. Person,Härt.-Tech. Mitt., Vol 23, 1968, p 296–308
S. Gunnarson,Härt.-Tech. Mitt., Vol 22, 1967, p 293–295
S. Ban-ya, J.F. Elliott, and J. Chipman,Metall. Trans., Vol 1, 1970, p 1313
M. Przylecka, W. Gestwa, M. Kulka, Carburizing and Carbonitriding Bearing LH15 Steel (52100),Proceedings of International Heat Treating Conference: Equipment and Processes (Schaumburg, IL), G.E. Totten and R.A. Wallis, Ed., ASM Inter- national, 1994, p 233-238
M. Kulka, M. Przylecka, W. Gestwa, and M. Piwecki,Proceedings of the Second ASM Heat Treating and Surface Eng. Conference (Dortmund), E.J. Mittemeijer, Ed., Trans. Tech. Publications, 1993, p 215-220
M. Przylecka, W. Gestwa, and M. Kulka,Proceedings of VI Conference Termoobróbka ′92, The Centre of Technical Progress, 1992, p 150-159
M. Przylecka, M. Kulka, and W. Gestwa, The Influence of Carbon Content on Functional Properties in Two-Phase Fields, Extended Abstracts Volume,Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies (Gliwice-Zakopane, Poland), L.A. Dobrzanski, Ed., Organizing Committee of International Scientific Conference, 1995, p 369-372; also Carburizing Lengthens Bearing-Element Life,Advanced Mater. Process., Vol 149 (No. 2), 1996, p 52
M. Przylecka and A. Perteck,Proceedings of International Conference—XlVth National Days of Heat Treatment (Bratislava-Strbske Pleso), The House of the Union Slovak Scientific and Technical Societies, 1992
W. Steven and A.G. Haynes,J. Iron Steel Inst., Vol 203, 1965, p 721–727
G. Parrish,Heat Treat. Met., Vol 4, 1976, p 102
D.P. Koistinen and R.E. Marburger,Acta Metall., Vol 7, 1959, p 59–60
R.C. Sharma, G.R. Purdy, and J.S. Kirkaldy,Metall. Trans. A, Vol 10, 1979, p 1119–1126
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Przylecka, M. The modeling of structure and properties of carburized low-chromium hypereutectoid steels. JMEP 5, 165–191 (1996). https://doi.org/10.1007/BF02650885
Issue Date:
DOI: https://doi.org/10.1007/BF02650885