References
A.R. Troiano:Trans. ASM, 1960, vol. 52, pp. 54–80.
J. C. M. Li, R. A. Oriani, and L. S. Darken:Z.F. Phys. Chem., 1966, vol. 49, pp. 271–90.
J. A. S. Green, H. W. Hayden, and W. G. Montague:Effect of Hydrogen on Behavior of Metals, A. W. Thompson and I. M. Bernstein, eds., TMS-AIME, Warrendale, PA, 1976, pp. 200–15.
R. M. Latanision, O. H. Gastine, and C. R. Compeau:Environment-Sensitive Fracture of Materials, Z. A. Foroulis, ed., TMS-AIME, Warrendale, PA, 1979, pp. 48–70.
H. W. Hayden and S. Floreen:Corrosion, 1971, vol. 27, pp. 429–34.
C. St. John and W.W. Gerberich:Metall. Trans., 1973, vol. 4, pp. 589–94.
J.A. S. Green and H. W. Hayden:Hydrogen in Metals, I. M. Bernstein and A.W. Thompson, eds., ASM, Metals Park, OH, 1974, pp. 235–46.
C. St. John:Scripta Met., 1975, vol. 9, pp. 141–44.
R. E. Swanson, A. W. Thompson, I. M. Bernstein, and J. L. Maloney:Hydrogen Effects in Metals, A.W. Thompson and I.M. Bernstein, eds., TMS-AIME, Warrendale, PA, 1981, pp. 459–66.
J. R. Pickens, J. R. Gordon, and L. Christodoulou:High-Strength Powder Metallurgy Aluminum Alloys, M.J. Koczak and G. J. Hildeman, eds., TMS-AIME, Warrendale, PA, 1982, pp. 177–92.
J. R. Pickens, J.R. Gordon, and J.A.S. Green:Metall. Trans. A, 1983, vol. 14A, pp. 925–30.
Chu Wuyang, Hsiao Chimei, Li Shigun, and Ju Shuryahn:First China-USA Bilateral Metallurgical Conference, The Metallurgical Press, Beijing, China, 1981, pp. 403–17.
A.W. Thompson and I. M. Bernstein:Environment-Sensitive Fracture, STP 821, ASTM, Philadelphia, PA, 1984, pp. 114–27.
B. F. Brown:Materials Research and Standards, March 1966, vol. 6, p. 126.
W. F. Brown and J. E. Srawley:Plane Strain Crack Toughness Testing of High Strength Metallic Materials, STP 410, ASTM, Philadelphia, PA, 1966.
W. G. Wilson:Combined Mode Fracture Mechanics, 1972, vol. 8, no. 3, pp. 267–76.
B. Gross and A. Mendelson:Int. J. of Fracture Mechanics, 1972, vol. 8, no. 3, pp. 267–76.
J. P. Benthem and W. T. Koiter:Mechanics of Fracture: Stress Analysis of Notch Problems, G. C. Sih, ed., Noordhoff, Alphen, 1972, vol. 5, pp. 38–68.
H. Tada, P. Paris, and G. Irwin:The Stress Analysis of Cracks Handbook, Del Research Corp., Hellertown, PA, 1973.
J. Malkin and A. S. Tetelman:Engineering Fracture Mechanics, 1971, vol. 3, pp. 151–67.
R.E. Swanson, I.M. Bernstein, and A.W. Thompson: VA Polytechnic Inst. & State Univ., Blacksburg, VA and Carnegie Mellon Univ., Pittsburgh, PA, unpublished research, 1985.
G. M. Spink, P. J. Worthington, and P. T. Heald:Materials Science and Engineering, 1972, vol. 10, pp. 129–37.
T. R. Wilshaw, C. A. Rau, and A. S. Tetelman:Engineering Fracture Mechanics, 1968, vol. 1, pp. 191–211.
A.S. Tetelman, T.R. Wilshaw, and C.A. Rau:Int. J. of Fracture Mechanics, 1968. vol. 4, no. 2, pp. 147–57.
G. Oates:Journal of the Iron and Steel Institute, January 1967, pp. 41–4.
R.O. Ritchie and R.M. Horn:Metall. Trans. A, 1978, vol. 9A, pp. 331–41.
R.O. Ritchie, W.L. Server, and R.A. Wullaert:Metall. Trans. A, 1979, vol. 10A, pp. 1557–70.
C. D. Beachem:Metall. Trans., 1972, vol. 3, pp. 437–51.
R. F. Smith and J. F. Knott:Proc. Conf. on Practical Application of Fracture Mechanics to Pressure Vessel Technology, Inst. of Mech. Engr. Conf., London, 1971.
G.C. Chipperfield and J.F. Knott:Metals Techn., 1975, vol. 2, pp. 45–51.
R. Roberti, G. Silva, D. Firrao, and B. DeBenedetti:Int. J. Fatigue, July 1981, pp. 133–41.
R. O. Ritchie, F. A. McClintock, H. Nayeb-Hashemi, and M. A. Ritter:Metall. Trans. A, 1982, vol. 13A, pp. 101–10.
C. Lipson:Machine Design, October 1950, vol. 22, pp. 97–100.
Rights and permissions
About this article
Cite this article
Swanson, R.E., Thompson, A.W. & Bernstein, I.M. Effect of notch root radius on stress intensity in mode I and mode III loading. Metall Trans A 17, 1633–1637 (1986). https://doi.org/10.1007/BF02650103
Issue Date:
DOI: https://doi.org/10.1007/BF02650103