Abstract
A detailed investigation concerning the microstructural characteristics of a rapidly solidified Al-Mg-Mn powder alloy has been carried out. A range of microstructures was observed in the atomized powder: dendritic, cellular, and featureless morphologies. Variations in structure have been related to cooling rate, nucleation undercooling, and recalescence during solidification. A metastable Al-Mn phase was created during atomization and was present in two distinct morphologies. Decomposition behavior during thermal and thermomechanical processing has been studied. An interesting feature was the retention of the metastable phase through the initial consolidation stages.
Similar content being viewed by others
References
G. H. Tan: Ph.D. Thesis, University of London, 1984.
E. A. Starke, Jr.: in Conf. Proc. “Strength of Metals and Alloys”, Pergamon Press, Australia, 1982, pp. 1025–44.
G.J. Marshall, E. K. Ioannidis, and T. Sheppard:Powder Met 1986 vol. 29, 1, pp. 57–64.
T. Sheppard, M. A. Zaidi, and G. H. Tan:Metal Science, 1983 vol. 17, no. 12, pp. 563–77.
J. P. Hirth:Metall. Trans. A, 1978, vol. 9A, pp. 401–04.
C. G. Levi and R. Mehrabian:Metall. Trans. A, 1982 vol. 13A pp. 13–23.
S.R. Coriell and R.F. Sekerka:J. Crystal Growth, 1983 vol. 61 pp. 499–506.
K. M. Knowles, A. L. Greer, W. O. Saxton, and N. M. Stobbs:Phil Mag. B, 1978, vol. 52B, No. 1, pp. L31–38.
D. Shechtman and I.A. Blech:Metall. Trans. A, 1985 vol. 16A pp. 1005–12.
P. A. Bancel, P. A. Heiney, P. W. Stephens, A. I. Goldman, and P M Horn:Phys. Rev. Lett., 1985, vol. 54, No. 22, pp. 2422–25.
M.A. Zaidi, J.S. Robinson, and T. Sheppard:M.S.T. 1985 vol 1 pp. 737–42.
G.J. Marshall and T. Sheppard:M.S.T., 1986, vol. 2, pp. 611–19.
L. E. Mondolfo:Aluminium Alloys: Structure and Properties Butterworths, London, 1976.
T. Sheppard, M. A. Zaidi, and G. H. Tan:Powder Met., 1983 vol. 26, No. 1, pp. 10–17.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Marshall, G.J., Ioannidis, E.K. & Sheppard, T. Microstructural characterization of a rapidly solidified Al-Mg-Mn powder alloy. Metall Trans A 18, 407–416 (1987). https://doi.org/10.1007/BF02648801
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02648801