Abstract
Four Ti-Cr-Nb alloys containing the C15 Laves phase have been given a series of mechanical tests, including compression, bending, notch toughness, elastic moduli measurement, microhardness, and a simple impact toughness test. Strength remains high between 900 °C and 1000 °C; moduli and specific moduli exceed those of titanium; 1000 °C ductility is substantial; but roomtemperature notch toughness is low. Since room-temperature impact toughness is substantial in unannealed samples, the effects of heat treatment will need to be studied. Oxidation rates have been measured on two of the alloys.
Similar content being viewed by others
References
High-Temperature, Ordered Intermetallic Alloys, MRS Symp. Proc, C. C. Koch, C. T. Liu, and N. S. Stoloff, eds., MRS, Pittsburgh, PA, 1985, vol. 37.
High-Temperature, Ordered Intermetallic Alloys II, MRS Symp. Proc, N. S. Stoloff, C. C. Koch, C. T. Liu, and O. Izumi, eds., MRS, Pittsburgh, PA, 1987, vol. 81.
High-Temperature, Ordered Intermetallic Alloys III, MRS Symp. Proc., C. C. Koch, C. T. Liu, N. S. Stoloff, and A. I. Taub, eds., MRS, Pittsburgh, PA, 1989, vol. 133.
R. L. Fleischer:J. Mater. Sci., 1987, vol. 22, pp. 2281–88.
R. A. Amato, C. M. Austin, J. C. Chesnutt, R. L. Fleischer, S. C. Huang, M. F. X. Gigliotti, A. M. Johnson, M. Y. Lee, R. G. Rowe, and G. E. Wasielewski: U.S. Air Force Base, Contract No. F33615-86-C-5073, Interim Report No. 1, G. E. Aircraft Engineering Report R-86-AEB-572, Oct. 31, 1986.
R. L. Fleischer and R. J. Zabala:Metall. Trans., 1990, vol. 21A, pp. 1951–57.
R. L. Fleischer, R. S. Gilmore, and R. J. Zabala:J. Appl. Phys., 1988, vol. 64, pp. 2964–67.
Binary Alloy Phase Diagrams, T. B. Massalski, ed., ASM, Metals Park, OH, 1986, vol. 1.
R. L. Fleischer, R. S. Gilmore, and R. J. Zabala:Acta Metall., 1989, vol. 37, pp. 2801–03.
G. Simmons and H. Wang:Single Crystal Elastic Constants and Calculated Aggregate Properties, A Handbook, 2nd ed., MIT Press, Cambridge, MA, 1971.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fleischer, R.L., Zabala, R.J. Mechanical properties of Ti-Cr-Nb alloys and prospects for high-temperature applications. Metall Trans A 21, 2149–2154 (1990). https://doi.org/10.1007/BF02647875
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647875