Abstract
In an Fe-5Cr-lMo-2Cu-0.5P-3C (wt pct) alloy prepared by liquid-phase sintering at 1120 °C, the intergranular liquid films migrate during cooling and isothermal heat treatment at temperatures where the solid and liquid phases coexist. The liquid film migration (LFM) occurs extensively even during rapid cooling, apparently because of a large driving force. The migrating liquid films solidify to form network carbides. In the regions swept by the migrating liquid films, the concentrations of the substitutional solute atoms are slightly different from those in the original grains. When cooled rapidly, martensite is abundant in these regions. It is possible that the driving force for LFM in this alloy stems in part from the C concentration change associated with the concentration changes of the slowly diffusing substitutional solute atoms.
Similar content being viewed by others
References
C. Thumuki, K. Ueda, H. Nakamura, K. Kondo, and T. Suganuma:Met. Powder Rep., 1983, vol. 38, pp. 433–35.
T. Suganuma, H. Nakamura, and T. Hikosaka:Toyota Technol., 1983, vol. 33, pp. 151–59.
G. Greetham and T. Chatterley:Powder Metall., 1991, vol. 34, pp. 119–25.
M. Iijima:Met. Powder Rep., 1983, vol. 38, pp. 635–37.
V. Raghavan:Phase Diagrams of Ternary Iron Alloys, ASM, Metals Park, OH, 1987, part 2.
N.R. Griffing, W.D. Forgeng, and G.W. Healy:Trans. AIME, 1962, vol. 224, pp. 148–59.
R. Benz, J.F. Elliott, and J. Chipman:Metall. Trans., 1974, vol. 5, pp. 2235–40.
H. Berns:Stahl Eisen, 1985, vol. 105, pp. 813–17.
D.N. Yoon and W.J. Huppmann:Acta Metall., 1979, vol 27 pp. 973–77.
Y.J. Baik and D.N. Yoon:Acta Metall., 1986, vol. 34, pp. 2039–44.
W.H. Rhee, Y.D. Song, and D.N. Yoon:Acta Metall., 1987, vol. 35, pp. 57–60.
W.H. Rhee and D.N. Yoon:Acta Metall., 1989, vol. 37, pp. 221–28.
Y.J. Baik, J.K. Kim, and D.Y. Yoon:Acta Metall. Mater., 1993, vol. 41, pp. 2385–93.
J.K. Kim and D.Y. Yoon:Acta Metall. Mater., 1994, vol. 42, pp. 913–19.
J.W. Jeong, D.N. Yoon, and D.Y. Kim:Acta Metall. Mater., 1991, vol. 39, pp. 1275–79.
Y.J. Baik and K.Y. Eun:J. Am. Ceram. Soc, 1991, vol. 74, pp. 1397–1400.
M. Kuo and R.A. Fournelle:Acta Metall. Mater., 1991, vol. 39, pp. 2835–45.
T. Muschik, W.A. Kaysser, and T. Hehenkamp:Acta Metall., 1989, vol. 37, pp. 603–13.
T.A. Parthasarathy and P.G. Shewmon:Scripta Metall., 1983, vol. 17, pp. 943–46.
T.W. Jang and D.Y. Yoon:Acta Metall. Mater., 1994, vol. 42, pp. 1947–52.
D. Tseng, Q.Y. Long, and K. Tangri:Scripta Metall., 1986, vol. 20, pp. 1423–26.
W. Steven and A.G. Haynes:J. Iron Steel Inst., 1956, vol. 183, pp. 349–59.
D.N. Yoon, J.W. Cahn, C.A. Handwerker, J.E. Blendell, and Y.J. Baik:Interface Migration and Control of Microstructure, C.S. Pande, ed., ASM, Metals Park, OH, 1986, pp. 19–31.
W.B. Pearson:A Handbook of Lattice Spacings and Structures of Metals and Alloys, Pergamon Press, Oxford, 1958, vol. 1.
W.C. Leslie:The Physical Metallurgy of Steels, McGraw-Hill, New York, NY, 1981, p. 111.
Y.H. Park and D.Y. Yoon:Z. Metallkd., 1992, vol. 83, pp. 881–86.
C.A. Handwerker, J.W. Cahn, D.N. Yoon, and J.E. Blendell:Diffusion in Solid: Recent Developments, M.A. Dayananda and G.E. Murch, eds., TMS-AIME, Warrendale, PA, 1985, pp. 275–92.
C.A. Handwerker:Diffusion Phenomena in Thin Films and Microelectronic Materials, D. Gupta and P.S. Ho, eds., Noyes Publications, Park Ridge, NJ, 1987, pp. 245–322.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shin, HS., Kim, JS., Yoon, DY. et al. The liquid film migration in a sintered Fe-Cr-C base alloy. Metall Mater Trans A 26, 1389–1393 (1995). https://doi.org/10.1007/BF02647589
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647589