Abstract
Because of their macroscopic brittle behavior, porous powder metallurgy (P/M) ferrous alloys are often not considered for structural applications. A statistical approach based on the evaluation and interpretation of the Weibull modulus was thus proposed to evaluate correctly and objectively the intrinsic structural reliability of these materials. In spite of their porosity, P/M ferrous alloys are as reliable as conventional wrought steels, provided that they are correctly produced and, if necessary, heat treated. In addition, the influence of density and the application of the method to the process optimization and control was highlighted. In all cases, the mechanical reliability of the materials was interpreted metallurgically.
Similar content being viewed by others
References
J.F. Knott,Fundamentals of Fracture Mechanics, John Wiley & Sons, 1973
H. Blumenauer and G. Pusch,Technische Bruchmechanik, VEB Deutscher Verlag fuer Grundstoffindustrie, 1982
A.D.S. Carter,Mechanical Reliability, MacMillan Education Ltd., 1986
A. Bennett,Mater. Sci. Technol, Vol 2, 1986, p 896–899
W.J. Weibull,J. Appl. Mech., Vol 18, 1951, p 293–297
G. Willman,Z. Werkstofftech., Vol 16, 1985,p 113–115
G. Straffelini and A. Molinari, inProc. of Euromat 92, Vol 1, As- sociazione Italiana di Metallurgia, Milano, 1992, p 373
J.J. Petrovic,Metall. Trans. A, Vol 18, 1987, p 1829–1834
G. Alpa,Eng. Fract. Mech., Vol 19 (No. 5), 1984, p 881–901
Metals Handbook, 9th ed.. Vol 1, American Society for Metals, 1984
C.M. Sonsino and V. Grubisic,Z. Werkstofftech., Vol 5, 1987, p 148–157
B. Karlsson and I. Bertilsson,Scand. J. Metall., Vol 11, 1982, p 26–32
G.F. Bocchini,Int. J. Powder Metall, Vol 22, 1986, p 185–202
A. Molinari, B. Tesi, and G. Straffelini,J. Mater. Sci. Lett., Vol 10,1991, p 327–330
A. Molinari, A. Tiziani, B. Tesi, and G. Straffelini,Advances in Powder Metallurgy, L.F. Pease and R.J. Sansoucy, Ed., Vol 4, Metal Powder Industries Federation and American Powder Metallurgy Institute, 1991, p 159
G. Straffelini and A. Molinari,Qual. Reliab. Eng. Int., Vol 8, 1992, p 3–8
G. Straffelini, A. Molinari, and A. Tiziani,Advances in Powder Metallurgy, J.M. Capus and R.M. German, Ed., Vol 5, Metal Powder Industries Federation and American Powder Metallurgy Institute, 1992, p 445
G.F. Bocchini, A. Molinari, G. Straffelini, and A. Zambon, inProc. World Conf. on Powder Metallurgy “PM 93,” Vol 2, Japan Society of Powder and Powder Metallurgy, 1993, p 1039
G. Straffelini and A. Molinari,Scr. Metall. Mater., Vol 30 (No. 7), 1994, p 833–838
J.D. Sullivan and P.H. Lauzon,J. Mater. Sci. Lett., Vol 5, 1986, p 1245–1247
P.D.T. O’Connor,Practical Reliability Engineering, Heyden, 1981
A. Molinari, G. Straffelini, V. Fontanari, and R. Canteri,Powder Metall., Vol 35, 1992, p 285–291
G. Straffelini, V. Fontanari, A. Molinari, and B. Tesi,Powder Metall., Vol 36, 1993, p 135–141
J.A. Lund,Int. J. Powder Metall. Powder Technol., Vol 21, 1985, p 47–56
S. van der Zwaag,J. Test. Eval., Vol 17 (No. 5), 1989, p 292–298
K. Kendall, McN. Alford, S.R. Tan, and J.D. Birchall,J. Mater. Res., Vol 1,1986, p 120–126
G. Straffelini, A. Molinari, and V. Fontanari, inProc. World Conf. on Powder Metallurgy “PM 94,” Vol 2, Societe Francaise de Metallurgie et de Materiaux and European Powder Metallurgy Association, 1994, p 839
W.J. Huppman and K. Dalal,Metallographic Atlas of Powder Metallurgy, Verlag Schmid GmbH, 1986
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Straffelini, G., Molinari, A. Microstructure and mechanical reliability of powder metallurgy (P/M) ferrous alloys. JMEP 5, 27–33 (1996). https://doi.org/10.1007/BF02647265
Issue Date:
DOI: https://doi.org/10.1007/BF02647265