References
I. Baker and D.J. Gaydosh:Mater. Sci. Eng., 1987, vol. 96, pp. 147–58.
M.A. Crimp and K. Vedula:Mater. Sci. Eng., 1986, vol. 78, pp. 193–200.
M.G. Mendiratta, S.K. Ehlers, D.K. Chaterjee, and H.A. Lipsitt:Proc. 3rd Int. Conf. on Rapid Solidification Processing Materials and Technologies, Gaithersburg, MD, Dec. 1982, R. Mehrabian, ed., National Bureau of Standards, Washington, DC, 1983, pp. 240–45.
P. Morgand, P. Mouturat, and G. Sainfort:Acta Metall., 1968, vol. 16, pp. 867–75.
G. Sainfort, P. Mouturat, P. Pepin, J. Petit, G. Cabane, and M. Salesse:Mem. Sci. Rev. Metall., 1963, vol. 60, pp. 125–34.
D.K. Chaterjee and M.G. Mendiratta:J. Met., 1981, vol. 33 (12), p. 6.
Structural Uses for Ductile Ordered Alloys, DARPA Rep. NMAB-419, National Academy Press, Washington, DC, 1984.
K.-M. Chang and S.C. Huang:High Temperature Deformation Behavior of a Ni3(Al, Ti) Single Crystal, GE-CRD Rep. 86CRD057, Schenectady, NY, Aug. 1986.
Y. Umakoshi, D.P. Pope, and V. Vitek:Acta Metall., 1984, vol. 32, pp. 449–56.
S. Miura, S. Ochiai, Y. Oya, Y. Mishima, and T. Suzuki:MRS Symp. Proc., MRS, Pittsburgh, PA, 1989, vol. 133, pp. 341–46.
M.G. Mendiratta, H.-M. Kim, and H.A. Lipsitt:Metall. Trans. A, 1984, vol. 15A, pp. 395–99.
Y. Umakoshi and M. Yamaguchi:Phil. Mag., 1981, vol. 44, pp. 711–15.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chang, K.M. Tensile and impact properties of directionally solidified Fe-40AI intermetallic. Metall Trans A 21, 3027–3028 (1990). https://doi.org/10.1007/BF02647223
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647223