Abstract
A nickel base superalloy was fatigued under constant plastic strain range (Δεp) control. The hardening response was investigated as a function of Δεp and particle size of the γ ′ phase. Hardening was found to be a function of the slip band spacing,i. Numerous measurements ofi and other statistical data on the slip band structures were obtained. Interactions between intersecting slip systems were shown to influence hardening. A Petch-Hall model was found to describe best this relationship between the response stress and the slip band spacing.
Similar content being viewed by others
References
M. Gell and G.R. Leverant:AIME-Trans., 1968, vol. 242, pp. 1869–79.
W. Milligan and S. D. Antolovich:Metall. Trans. A, 1987, vol. 18A, pp. 85–95.
H.J. Merrick:Metall. Trans., 1974, vol. 5, pp. 891–97.
R.E. Stoltz and A.G. Pineau:Mater. Sci. Eng., 1978, vol. 34, pp. 275–84.
C.H. Wells and S.P. Sullivan:Trans, of ASM, 1964, vol. 57, pp. 841–55.
C. H. D. Arbuthnot:Proc. 4th European Conference on Fracture, Leoben, Austria, K.L. Maurer and F.E. Matzer, eds., 1982, pp. 407–13.
M. Clavel, C. Levaillant, and A. Pineau:Creep-Fatigue-Environment Interactions, Conf. Proc. AIME, Milwaukee, WI, R. M. Pelloux and N.S. Stoloff, eds., 1980, pp. 24–45.
B. A. Lerch and V. Gerold:Acta Metall., 1985, vol. 33, pp. 1709–16.
V. Gerold, B.A. Lerch, and D. Steiner:Z.f. Metallkunde, 1984, vol. 75, pp. 546–53.
CE. Feltner and C. Laird:Acta Metall., 1967, vol. 15, pp. 1633–53.
J.M. Finney and C. Laird:Phil. Mag., 1975, vol. 31, pp. 339–66.
H. Mughrabi:Continuum Models of Discrete Systems 4, O. Brulin and R.K.T. Hsieh, eds., North-Holland, Amsterdam, 1981, pp. 241–57.
H. Mughrabi:Mater. Sci. Eng., 1978, vol. 33, pp. 207–23.
H. Wiedersich:J. of Metals, 1964, vol. 16^(5), pp. 425–30.
Z. S. Basinski:Phil. Mag., 1959, vol. 4, pp. 393–432.
A. Seeger:Work Hardening, TMS-AIME 46, J. P. Hirth and J. Weertman, eds., Gordon and Breach Sci. Publ., New York, NY, 1968, pp. 27–60.
D.S. Kemsley and M.S. Paterson:Acta Metall., 1960, vol. 8, pp. 453–67.
B.A. Lerch: Dissertation, University of Stuttgart, 1983.
J. P. Bailon and S. D. Antolovich: Fatigue Mechanisms: Advances in Quantitative Measurements of Physical Damage, ASTM STP 811, J. Lankford, D. L. Davidson, W. L. Morris, and R. P. Wei, eds., 1983, pp. 313-47.
N.J. Petch:Journ. of the Iron and Steel Institute, 1953, vol. 174, pp. 25–28.
B. A. Lerch, N. Jayaraman, and S. D. Antolovich:Mater. Sci. Eng., 1984, vol. 66, pp. 151–66.
L. Anand and J. Gurland:Metall. Trans. A, 1976, vol. 7A, pp. 191–97.
K. D. Challenger and J. Moteff:Fatigue at Elevated Temperatures, ASTM STP 520, A. Charden, A. McEvily, and C. Wells, eds., 1973, pp. 68-78.
H. Abdel-Raouf, T. H. Topper, and A. Plumtree:Fatigue at Elevated Temperatures, ASTM STP 520, 1973, pp. 300-10.
M.R. Staker and D. L. Holt:Acta Metall., 1972, vol. 20, pp. 569–79.
K. U. Snowden:Acta Metall., 1963, vol. 11, pp. 675–84.
P.O. Kettunen and U. F. Kocks:Acta Metall., 1972, vol. 20, pp. 95–103.
L. M. Brown and R.K. Ham:Strengthening Methods in Crystals, A. Kelly and R.B. Nicolson, eds., Applied Sci. Pub., London, 1971, pp. 9–135.
S.M. Copley and B.H. Kear:Trans. TMS-AIME, 1967, vol. 239, pp. 984–91.
A.W. Thompson, M.I. Baskes, and W. F. Flanagan:Acta Metall., 1973, vol. 21, pp. 1017–28.
H. Dong and A.W. Thompson:Metall. Trans. A, 1985, vol. 16A, pp. 1025–30.
M.F. Ashby:Phil. Mag., 1970, vol. 21, pp. 399–424.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lerch, B.A., Gerold, V. Cyclic hardening mechanisms in NIMONIC 80A. Metall Trans A 18, 2135–2141 (1987). https://doi.org/10.1007/BF02647085
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02647085