Abstract
Thick Y-Ba-Cu-O and Er-Ba-Cu-O coatings were deposited by plasma spraying onto nickel substrates. These plasma-sprayed coatings were laser melted to modify their microstructures. The effects of primary processing conditions, such as linear energy and number of passes, on microstructural modifications were assessed. The microstructure of the as-sprayed coatings was largely transformed to produce a fine Y2O3 dispersion in a Ba-Cu-O matrix. A very low level of coating/substrate interactions can be maintained by appropriate laser processing conditions.
Similar content being viewed by others
References
R.A. Neiser, J.P. Kirkland, W.T. Elam, H. Herman, S. Rangaswamy, V.M. Letoumeau, and N. Osofsky, Electrical, Chemical and Structural Properties of Plasma-Sprayed Y-Ba-Cu-O Oxide Superconducting Coatings,Mater. Res. Soc. Symp. Proc, Vol 99, 1988, p 689–693
J.J. Cuomo, C.R. Guarnieri, S.A. Shivashankar, R.A. Roy, D.S. Yee, and R. Rosenberg, Large Area Plasma Spray Deposited Supercon- ducting YBa2Cu3O7 Thick Films,Adv. Ceram. Mater., Vol 2,1987, p 422–429
G.N. Heintze, R. McPherson, D. Tolino, and C. Andrikidis, The Struc- ture of Thermally Sprayed YBa2Cu3C7-x Superconducting Coatings,J. Mater. Sci. Lett., Vol 7, 1988, p 251–253
L. Pawlowski, A. Gross, and R. McPherson, Microstructure of Plasma-Sprayed YBa2Cu3O 7High-Temperature Superconductors,J. Mater. Sci., Vol 26,1991, p 3803–3808
D. Dubé, P. Lambert, B. Arsenault, and B. Champagne,Post-Deposition Treatments of Y-Ba-Cu-O Plasma Sprayed Coatings Deposited on Nickel,Thin Solid Films, Vol 193/194,1990, p 847–856
S. Jin, R.C. Sherwood, T.H. Tiefel, R.B. van Dover, R.A. Fastnacht, and M.E. Davis, Processing for High Critical Currents in YBa2Cu3O7,High Temperature Superconductors II (Extended Abstracts), 1988 MRS Spring Meeting, Vol EA-14,1988, p 153–156
M. Morita, M. Murakami, K. Miyamoto, K. Sawano, and S. Matsuda, Superconducting Properties of Bulk YBa2Cu3O7-YPrepared by a Quench and Melt Growth Process,Physica C, Vol 162–164, 1989, p 1217–1218
K. Salama, V. Selvamanickam, L. Gao, and K. Sun, High Current Den- sity in Bulk YBaCuO Superconductor,Appl. Phys. Lett., Vol 54,1989, p2352–2354
P.J. McGinn, M.A. Black, and A. Valenzuela, Texture Processing of YBa2Cu3O{7-x}by Joule Heat Zone Melting,Physica C, Vol 156,1988, p57–61
J.R. Cave, P.R. Critchlow, P. Lambert, and B. Champagne, Calculation of Magnetic Flux Profiles and Deduction of Critical Current Densities for Type II Superconductors,IEEE Trans. Magn., Vol 27, 1991, p 1379–1382
B. Arsenault, D. Dubé, and C. Gélinas, Laser Texturing: A Directional Solidification Technique to Reduce Material Transport During HTSC Texturing,Proc. 2nd Int. Conf. Laser Advance Materials Processing—Science and Applications, Vol 2, A. Matsunawa and S. Katayama, Ed., Nagaoka, Japan, 1992, p 849–854
H. Miyazawa, K. Hotta, S. Watanabe, S. Miyake, H. Hirose, and M. Mu-rakawa, Preparation of Superconductive Films Using Plasma Sprayed Technique with Laser Post-Treatment,Supercond. Sci. Technol, Vol 4,1991,p491–494
M. Murakami, The Quench and Melt Growth Process,Supercurrents, Vol 9,1989, p 41–47
M.F. Yan, R.L. Barns, H. M. O’Bryan, Jr., P.K. Gallagher, R.C. Sherwood, and S. Jin, Water Interaction with the Superconducting YBa2Cu2O2Phase,Appl. Phys. Lett., Vol 51 (No. 7), 1987,p 532–534
C.L. Teske and H. Muller-Buschbaum, Zur Kenntnis von BaCu2O2,Z. Naturforch., Vol B27,1972, p 296–301 in German
D. Dubé, B. Champagne, P. Lambert, and Y. LePage, Occurrence of BaCu2O2 in Plasma Sprayed YBaCuO Coatings,Mater. Lett, Vol 9, 1990, p 353–356
J.-H. Shieh and S.-T. Wu, Rapid Solidification of a Plasma-Sprayed Ce- ramic Coating Melted by a CO2Laser,Appl. Phys. Lett., Vol 59,1991, p1512–1514
P. Lambert, D. Dubé, C. Gélinas, and B. Arsenault, Effect of Precursors on the Size of 211 in Melt-Processed ErBaCuO,Mater. Lett., in press
I. Halasz, V. Fulop, I. Kirschner, and T. Porjesz, Thermodynamical and X-Ray Diffraction Investigations of Ba2Cu3O5+dfor Preparation of Y- Ba-Cu-O Superconductors,J. Crystal Growth, Vol 91, 1988, p 444–449
S. Nagaya, M. Miyajima, I. Hirabayashi, Y. Shiohara, and S. Tanaka, Rapid Solidification of High-Tc Oxide Superconductors by a Laser Zone Melting Method,IEEE Trans. Magn., Vol 27,1991, p 1487–1494
M.J. Cima, M.C. Flemings, A.M. Figueredo, M. Nakade, H. Ishii, H.D. Brody, and J.S. Haggerty, Semisolid Solidification of HTSC Oxides,J. Appl Phys 72 (1), July, 1992
C. Gélinas, P. Lambert, D. Dubé, B. Arsenault, and J.R. Cave, Texturing of Thick Films on a Metallic Substrate,Supercond. Sci. Technol., Vol 6, 1993, p 368–372
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Arsenault, B., Champagne, B., Dubé, D. et al. Laser processing of plasma-sprayed R-Ba-Cu-O coatings. JTST 2, 329–337 (1993). https://doi.org/10.1007/BF02645861
Issue Date:
DOI: https://doi.org/10.1007/BF02645861