References
M.R. Meyerson and S.J. Rosenberg:Trans. ASM, 1954, vol. 46, p. 1225.
T. Maki, S. Shimooka, and I. Tamura:Metall. Trans., 1971, vol. 2, p. 2944.
T.J. Nichol, G. Judd, and G. S. Ansell:Metall. Trans. A, 1977, vol. 8A, p. 1877.
M. Umemoto and W. S. Owen:Metall. Trans., 1974, vol. 5, p. 2041.
Y. Inokuti and B. Cantor:J. Mat. Sci., 1977, vol. 12, p. 946.
Y. Inokuti and B. Cantor:Scripta Met., 1976, vol. 10, p. 655.
Y. Inokuti and B. Cantor:Proceedings of ICOMAT 1979, Dept. of Mat’ls. Sci. and Engrg., Massachusetts Institute of Technology, Cambridge, MA, June 1979, pp. 46–52.
Y. Inokuti and B. Cantor:Acta Met., 1982, vol. 30, p. 343.
G. S. Ansell, P. J. Brofman, T. J. Nichol, and G. Judd:Proceedings of ICOMAT 1979, Dept. of Mat’ls. Sci. and Engrg., Massachusetts Institute of Technology, Cambridge, MA, June 1979, p. 350.
R.E. Cech and D. Turnbull:Trans. TMS-AIME, 1959, vol. 215, p. 854.
E.M. Breinan and G. S. Ansell:Metall. Trans., 1970, vol. 1, p. 1513.
R. Pradhan and G.S. Ansell:Metall. Trans. A, 1978, vol. 9A, p. 793.
J. J. Rayment, O. Ashiru, and B. Cantor:Proceedings of an Int. Conf. on Solid-Solid Phase Transformations, H. I. Aaronson, D. E. Laughlin, R. F. Sekerka, and CM. Wayman, eds., TMS-AIME, Warrendale, PA, 1982, p. 1385.
P. J. Brofman: Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, December 1980.
P. J. Brofman, G.S. Ansell, and G. Judd:Metall. Trans. A, 1982, vol. 13A, p. 203.
J. S. Benjamin:Metall. Trans., 1970, vol. 1, p. 2943.
J.R. Strife, M.J. Carr, and G.S. Ansell:Metall. Trans. A, 1977, vol. 8A, p. 1471.
P. J. Fisher and D.J.H. Corduroy:Metall. Trans. A, 1979, vol. 10A, p. 1421.
H. Tobin and R. L. Kenyon:Trans. ASM, 1938, vol. 26, p. 133.
G. L. Kehl:Metallographic Laboratory Practice, 3rd ed., McGraw-Hill, 1949, pp. 280-81.
K. W. Andrews:JISI, 1965, vol. 203, p. 721.
J.P. Hirth:Metall. Trans., 1972, vol. 3, p. 3047.
M. Schankula, J. D. Embury, and D. J. Lloyd:Proc. 2nd Int. Conf. on Strength of Metals and Alloys, ASM, Metals Park, OH, 1970, p. 209.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Brofman, P.J., Ansell, G.S. On the effect of fine grain size on the Ms temperature in Fe-27Ni-0.025C alloys. Metall Trans A 14, 1929–1931 (1983). https://doi.org/10.1007/BF02645565
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02645565