References
J.C. Williams and M.J. Blackburn:Ordered Alloys, B.H. Kear,et al, eds., Claitors Pub. Div., Baton Rouge, LA, 1970, p. 425.
S.M.L. Sastry and H.A. Lipsitt:Metall. Trans. A, 1977, vol. 8A, p. 1543.
H.A. Lipsitt, D. Shechtman, and R.E. Schaprik:Metall. Trans. A, 1980, vol. 11A, p. 1369.
S. M. L. Sastry and H. A. Lipsitt:Acta Met., 1977, vol. 25, p. 1279.
M.G. Mendiratta and H.A. Lipsitt:J. Mat. Sci., 1980, vol. 15, p. 2985.
R. Von Mises and Z. Angew:Meth. Mech., 1928, vol. 8, p. 161.
M.J. Blackburn:Trans. TMS-AIME, 1967, vol. 239, p. 660.
N.S. Stoloff and R.G. Davies:Trans. TMS-AIME, 1964, vol. 57, p. 247.
L. S. Bushner and L. P. Kitaeva:Soviet Phys-Crystallography, 1965, vol. 9, p. 740.
J. H. Kirby and F. W. Noble:Phil. Mag., 1967, vol. 16, p. 1009.
J.H. Kirby and F. W. Noble:Phil. Mag., 1969, vol. 19, p. 877.
P.J. Jones and J.W. Edington:Phil. Mag., 1973, vol. 27, p. 393.
G.W. Groves and A. Kelly:Phil. Mag., 1963, vol. 8, p. 877.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
YANG, W.J.S. “C” component dislocations in deformed ti3ai. Metall Trans A 13, 324–328 (1982). https://doi.org/10.1007/BF02643326
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02643326