References
R. J. McDonald and J. D. Hunt:Trans. TMS-AIME, 1969, vol. 245, p. 1993.
K. A. Jackson, J. D. Hunt, D. R. Uhlman, and T. P. Seward, III:Trans. Met. Soc. AIME, 1966, vol. 236, p. 149.
W. M. J. Salter and P. E. Waudby: Proc. Conf. on The Solidification of Metals, Brighton, 1968, p. 412, Iron and Steel Institute, London.
A. Ohno:ibid., p. 349.
G. S. Cole and G. F. Boiling:Trans. TMS-AIME, 1967, vol. 239, p. 1860.
E. Marburg:AIME Trans., 1953, vol. 197, p. 157.
S. Ya. Skoblo:Steel (USSR), 1962, no. 3, p. 185.
W. A. Tiller:J. Iron Steel Inst., 1959, vol. 192, p. 338.
T. S. Piwonka and M. C. Flemings:Trans. TMS-AIME, 1966, vol. 236, p. 1157.
A. E. Scheidegger:The Physics of Flow Through Porous Media, University of Toronto Press, 1960.
A. A. Zborovski and E. I. Rabinovich:Izv. Vysshikh Uchebn. Zavedenii Chemaya Met., 1966, no. 12, p. 44.
K. Naritaand M. Taniguchi:Tetsu to Hagane, 1969, vol. 55, p. 1199; also see K. Narita and M. Taniguchi:ibid., 1970, vol. 56, p. 212.
T. Comon and P. Bastien:Rév. Met., 1968, vol. 65, p. 13.
J. R. Blank and F. B. Pickering: Proc. Conf. on The Solidification of Metals Brighton, 1968, p. 370 Iron and Steel Institute, London.
Y. Nakagawa and A. Momose:Tetsu to Hagane, 1967, vol. 53, p. 1406.
N. G. Bogdanova and V. N. Maslova:Steel (USSR), 1963, no. 8, p. 646.
K. Narita, M. Taniguchi, A. Kujime, and S. Yamada:Tetsu to Hagane, 1967, vol. 53, p. 1213.
F. B. Pickering: B.S.C. Swinden Laboratories Moorgate, private communication, 1968.
W. M. Wojcik and R. F. Kowal:Trans. TMS-AIME, 1965, vol. 233, p. 1867.
T. Mori:Tetsu to Hagane, 1967, vol. 53, p. 541.
I. Miyagawa, E. Nomura, and T. Michio:ibid., 1969, vol. 55, p. 5728.
D. V. Boger and J. W. Westwater:J. Heat Transfer, 1967, vol. 89, p. 81.
A. Kohn:Coulée de l’Acier, 1958, Part 3, pp. 1-52.
P. K. Rohatgi and C. M. Adams:Trans. TMS-AIME, 1967, vol. 239, p. 1729.
P. K. Rohatgi, S. M. Jain, and C. M. Adams:Ind. Eng. Chem. Fundamentals, 1968, vol. 7, p. 72.
P. Rocquet, J. Adam-Gironne, and J. C. Rossi:Rev. Met,, 1967, vol. 64, p. 257.
P. Rocquet, J. C. Rossi, and J. Adam-Gironne:J. Metals, 1967, vol. 19, p. 57.
Author information
Authors and Affiliations
Additional information
J. McDONALD and J. D. HUNT, Trans. TMS-AIME, 1969, vol. 245, pp. 1993–97.
An erratum to this article is available at http://dx.doi.org/10.1007/BF03038441.
Rights and permissions
About this article
Cite this article
Standish, N. Discussion of “fluid motion through the partially solid regions of a casting and its importance in understanding a type segregation”. Metall Trans 1, 2026–2027 (1970). https://doi.org/10.1007/BF02642817
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02642817