References
A. K. Ghosh and S. S. Hecker:Met. Trans., vol. 5, 1974, pp. 2161–164.
B. N. Ferry:Proc. I5th Mech. Working and Steel Processing Conf., pp. 191–205, Met. Soc. AIME, New York, 1973.
S. S. Hecker:Metals Eng. Quart., vol. 13, no. 3, pp. 42–48.
Z. Marciniak, K. Kuczynski, and T. Pokora:Int. J. Mech. Sci., 1973, vol. 15, pp. 789–805.
H.Van Minh, R. Sowerby, and J. L. Duncan:Int. J. Mech. Sci., 1975, vol. 17, pp. 339–49.
B. Kaftanoglu and J. M. Alexander:Int. J. Mech. Sci., 1970, vol. 12, pp. 1065–084.
A. P. Lee and J. R. Hiam:Factors Influencing the Forming Limit Curves of Sheet Steel Used for Press Forming, Sheet Metal Ind., in press.
S. P. Keeler:Forming Limit Criteria-Sheets, presented at the 1974 Sagamore Conf., Raquette Lake, New York, Aug. 13–16, 1974.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Charpentier, P.L. Influence of punch curvature on the stretching limits of sheet steel. Metall Trans A 6, 1665 (1975). https://doi.org/10.1007/BF02641986
Received:
DOI: https://doi.org/10.1007/BF02641986