Zusammenfassung
In Fortsetzung früherer Untersuchungen über die Zähigkeit von Holz wird in dervorliegenden Arbeit die Änderung des Izod-Wertes eines Normstabes in Abhängigkeit von der Änderung 1. des Kerbwinkels, 2. der Schlagrichtung zu den Jahrringen und 3. des Feuchtigkeitsgehaltes genau untersucht. Eine parabolische und eine Exponential-gleichung werden an Hand von Kurven für die Änderung des Izod-Wertes in Abhängigkeit vom Feuchtigkeitsgehalt miteinander verglichen. Besonders genau wurde die Änderung in der Nähe des Fasersättigungspunktes beobachtet, und die Verf. weisen auf die Notwendigkeit einer genauen Untersuchung gerade in diesem Bereich hin.
Summary
Continuing previous investigations on toughness in timber, the variation of Izod-values of a standard sized specimen with variation in 1. notch angle, 2. direction of blow to the annual rings and 3. moisture content is studied in the present paper. A parabolic equation and an exponential equation are compared based on curves for variation of Izod values with the moisturecontent. Certain observations are made near to the fibre saturation point and the need for accurate determination especially in this region is discussed.
Schrifttum
Brown, H. P., A. J. Panshin u. G. G. Forsaith: Textbook of Wood Technology. Vol. II. New York 1952: MacGraw-Hill.
Clarke, S. H.: Recent Work on the Growth, Structure and Properties of Wood. For. Prod. Res. Spec. Rep. No. 5. London 1936.
Kitahara, K.: Communication to C. R. O. (Service Branch). F. R. I. Dehra Dun. 1953.
Kollmann, F., u. A. C. Sekhar: Some Preliminary Investigations on Measurement of Toughness in Timber. Ind. For. Bulletin No 167. Delhi 1954.
Seamen-, L. N., u. V. D. Limaye: The Physical and Mechanical Properties of Wood Grown in India. Indian For. Rec. Vol.18 (1933) Pt. 10. Third Interim Report on Proj. 1.
Wangaard, F. F.: The Mechanical Properties of Wood. New York 1950: John Wiley & Sons.
Wilson, T. R. C.: Strength-Moisture Relations for Wood. Tech. Bull. No. 282. U. S. Dept. of Agriculture 1932.
Author information
Authors and Affiliations
Additional information
Das Izod-Verfahren ist beschrieben in F. Kollmann: Technologie des Holzes und der Holzwerkstoffe, 2. Aufl. Band I, S. 858/859. Berlin, Göttingen, Heidelberg 1951: Springer.—Die vorliegenden Versuche wurden 1954 durchgeführt
Rights and permissions
About this article
Cite this article
Kollmann, F., Sekhar, A.C. Untersuchungen über die Zähigkeit von Hölzern—Dritte Mitteilung: Der Einfluß verschiedener Faktoren auf die Ermittlung von Izod-Werten. Holz als Roh-und Werkstoff 16, 365–371 (1958). https://doi.org/10.1007/BF02617854
Issue Date:
DOI: https://doi.org/10.1007/BF02617854