Abstract
This paper reports on plywood glued by adhesives based on lignin-phenol-formaldehyde resins. Resin was obtained by polycondensation of sulphate lignin with phenol and formaldehyde in alkali medium. Sulphate lignin was separated from black liquor obtained by delignification of poplar and willow wood.
Zusammenfassung
Dieser Aufsatz berichtet über Sperrholz, das mit Klebstoffen auf der Basis Lignin-Phenol-Formaldehyd verleimt wurde. Das Harz wurde durch Polykondensation von Sulfatlignin mit Phenol und Formaldehyd in alkalischem Medium hergestellt. Das Sulfatlignin war aus Ablaugen nach der Delignifizierung von Pappel- und Weidenholz isoliert worden.
Similar content being viewed by others
Literature
Gupta, R. C.; Singh, S. P.; Jolly, S.: Phenol-lignininformaldehyde adhesives for plywood. Holzforsch. Holzverwert. 30 (6) (1978) 109–112.
Gupta, R. C.; Sehgal, V. D.: Effect of viscosity and molecular weight of lignin-phenolformaldehyde resin on the glue adhesion strength of plywood. Holzforsch. Holzverwert. 31 (1) (1979) 7–9
Klašnja, B.: Possibility of the utilization of Kraft lignin from black liquors of pulp and paper industry obtained from poplar and willow wood for the production of ligninphenolformaldehyde resins. Works 20. Poplar Research Institute, Novi Sad, YU 1987
Kopitović, Š.; Klašnja, B.: Research of application of Kraft lignin on soft-wood (poplar and willow) basis for obtaining the lignin-phenol-formaldehyde resins, 18th IUFRO Congress Proceedings, Division 5, 538. Ljubljana, YU 1986
Pecina, H.: Effektive Verwendung lignocelluloser Sekundärrohstoffe und Abprodukte zur Werkstoffherstellung Holztechnologie 31 (4) (1990) 181–184
Pecina, H.; Beranczyk, Z.: Untersuchungen zur Herstellung harter Holzfaserplatten im Trockenverfahren unter Verwendung von Lignin-Phenol-Bindemitteln. Holz Roh-Werkstoff 49 (5) (1991) 207–211
Yao, J.: Hardboard from municipal solid waste using phenolic resin or black liquor as a binder, Forest Prod. J. 28 (10) (1978) 77–82
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Klašnja, B., Kopitović, S. Lignin-Phenol-Formaldehyde resins as adhesives in the production of plywood. Holz als Roh-und Werkstoff 50, 282–285 (1992). https://doi.org/10.1007/BF02615352
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02615352