Abstract
It is shown that multicomponent guide transmitted-power converters containing tungsten bolometers can be used as interpolating components. The interpolation error is estimated, and experimental results are presented.
Similar content being viewed by others
References
A. I. Mekhannikov and V. A. Perepelkin, in this issue, p. 52.
A. I. Mekhannikov, V. A. Perepelkin, and V. G. Chuiko, “Methods and means for radio-engineering measurements”, Trudy VNIIFTRI, issue 20(50), 3 (1975).
V. R. Grigorova et al., “Researches on radio-engineering measurements”, Trudy VNIIFTRI, issue 40(70), 14 (1979).
V. A. Perepelkin, Research and Development on Precision Apparatus for Measuring UHF Power at Medium and High Levels in Waveguide Systems: Ph. D. Thesis [in Russian], Moscow (1981).
V. A. Perepelkin and V. G. Chuiko, “Methods and means for radio-engineering measurements”, Trudy VNIIFTRI, Issue 27(57), 68 (1976).
T. R. Selezneva and A. I. Mekhannikov, Izmerit. Tekhn., No. 2, 39 (1980).
Sh. Kh. Iskhakov et al., “Research on the metrological characteristics of primary standards and substandard instruments in the area of radio measurements”, Trudy VNIIFTRI, Moscow (1983), p. 39.
S. A. Aivazyan, I. S. Enyukov, and P. D. Meshalkin, Applied Statistics [in Russian], Finansy Statistika Moscow (1985).
V. G. Chuiko, in this issue, p. 55.
Additional information
Translated from Izmeritel'naya Tekhnika, No. 3, pp. 64–66, March, 1994.
Rights and permissions
About this article
Cite this article
Panteleeva, T.R. Bolometric transmitted-power interpolator. Meas Tech 37, 355–358 (1994). https://doi.org/10.1007/BF02614279
Issue Date:
DOI: https://doi.org/10.1007/BF02614279