Conclusions
The above methods can be used for producing devices for an automatic or visual continuous checking of curvilinear detail profiles represented by epi-or hypocycloids and their equidistantials, or by curves which are approximated by the former.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Literature Cited
Bauart und gegenwärtiger Entwicklungsstand einer Trochoiden Rotationskolbenmaschine. Techniche Rundschau, 1960, No. 7.
N. M. Karelin, Vestnik mashinostroeniya, 1958, No. 1.
M. F. Malikov, Basic Metrology [in Russian] (Moscow, 1949).
N. M. Karelin, Method for Making Curvilinear Cross Section Components without the use of Cams [in Russian] (Works of the Moscow Aviation Technological Institute, No. 5, 1949).
R. V. Dybskii, Instrument for Efficient Checking of Clock-Type Indicators with a Multiplying Factor of 0.01 mm [in Russian] (Informational Materials for Rationalizing the Equipment and Methods in Checking Measures and Measuring Instruments, 1952).
N. M. Karelin, Izmeritel'naya Tekhnika, 1959, No. 8.
Additional information
Translated from Izmeritel'naya Tekhnika, No. 11, pp. 7–12, November, 1961
Rights and permissions
About this article
Cite this article
Karelin, N.M., Kiparenko, V.I. Methods for continuous automatic checking of cylindrical components with curvilinear cross sections. Meas Tech 4, 863–868 (1961). https://doi.org/10.1007/BF02614114
Issue Date:
DOI: https://doi.org/10.1007/BF02614114